Jump to content
SAU Community

Recommended Posts

Got any runs of the 3 buddy drift with monkhouse and the blue ute?

That was the highlight of the weekend, actually was some of the best drifting I have seen. Looked mint

none of my cameras captured that run sadly... someone filmed from the crowd tho.. can be found on my page if you have a look.

http://www.facebook.com/video/video.php?v=109807555839205

Not sure if I missed it but how did you hook up the accusump - did you use the electronic solenoid or just hook it up directly so it's constantly filling and discharging?

You put on an amazing smoke show at wtac btw!!

Cheers dude!

accusump is as easy as possible.. no elec solenoid,. the sump is sitting behind the drivers seat and handle is accessable from the seat, i have it covered as per cams regs. Braided line goes down the transtunnel and hooks up to a T piece on the oil relocator kit in between the block and the oil filter

when motor is off the valve is off so it has a storage of oil for when i start it next time, when i start it i open the valve all the way, start it, let it warm up and bleed any air out then close the valve to half and thats where it stays for operation. the reason behind the half valve position is because we found that it was discharging too quickly fully open and then taking too long to fill up.

Every set up is different.. I did some data logging with valve set in different positions before I found the best one that worked for me.

Ill get some pics up soon of it.. Enclosure is nothing fancy lol just a rolled sheet of alloy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...