Jump to content
SAU Community

Recommended Posts

Well I am starting the saving process to make an order so that hopefully by year end I can have everything needed for my upgrade. Here is my base and what my plans are and let me know what you think of it.

Base:

ER34 RB25DET Neo - pretty much stock

NGK Iridiums BKR7EX-11 gapped to 0.8

HKS FMIC

Trust 13 row Oil Cooler

Two Core Radiator

Kakimoto 3.5" Exhaust

Blitz ECU

Blitz SSBC

Blitz Timer and Gauge

Trust Air Filter

Defi Boost, Oil Temp, Oil Pressure, Water Temp, EGT

Plans:

HKS Bottom Mount Manifold - Actually Have this already

GT3076R 0.82A/R with four bolt turbin housing and V-band add-on

External Wastegate - Not sure what size to go with and also what alternative can I use instead of the HKS that will fit properly on the manifold? I am thinking like a Tial 40mm, your thoughts??

Spare head with the RB26DETT ITBs and Intake Manifold setup - Help eliminate the pipe running over and also a better look same time

Keeping the TCS

RB26DETT 700CC Injectors with HKS/Tomei/Sard Fuel Rail and Resistor pack

RB26 Cam Cover and Center Plate - Bling

Keeping VCT Solenoid

Oil Return from Head

Cosworth Headgasket

Tomei Restrictor and block off as well

ARP Headstuds

Clutch ?????

I really don't want to get in the block if I do get some extra cash and I get an entire spare engine I will get the collar attached to the snout, freshen up the block with bearings, ARP mains and ARP rod bolts also try to adapt the RB26 sump as well. Can I get your thoughts on the setup and also what clutch recommendation for a daily driver that will be at some points be in standstill traffic and on hills as well, not looking for something aggressive but able to handle 450HP. Also, what wastegate option? My management will be a toss up between the Vipec and the Power FC, the Power FC being so expensive now I may swing the Vipec way. Please no bashing on the management but on all other aspects feel free :dry:.

Well as can be seen, I already have the HKS low mount mani, can I get the 3071R T3 flanged and also externally gated? Really don't want to block off the flange and I already have it so wanna use it. Also do I have to worry about clearance issues with the ABS setup and also my engine mount?

high flow or 3071, id think the 3071 would have abit more kick, even though they have the same output rating, cheaper than a high flow

anyone know what parts need to be bought to fit 3071, oil/waterlines/dump/manifold

Edited by Dorifta
Well as can be seen, I already have the HKS low mount mani, can I get the 3071R T3 flanged and also externally gated? Really don't want to block off the flange and I already have it so wanna use it. Also do I have to worry about clearance issues with the ABS setup and also my engine mount?

So sell the manifold.

What does it matter if you have it on there or not?

You can get a GT3071 in external gate form as it comes from the same turbine family as the GT3076.

I would stick with your original plan and go the GT3076 there is no need to wring the neck of the turbo to make your power target and you will have some headroom if you want with minimal penalty.

If you have a HKS cast manifold (divided) I would use it as it opens up the possibility of using a T3 flanged twin scroll turbine housing like ATPturbo.com sell. You are going to need to fabricate some exhaust and intake bits to make it fit anyway so it makes little difference if you change manifolds at the same time to a superior option (since you have it on hand).

IMO wrong turbo for 450hp as you stated.

Too big.

You want a 3071, and then you don't need external gates either, a lot simpler and will make the 250-260rwkw which is your 450hp

What u smokin bro?!?

Last time i checked 450hp was more like 335kw so the GT3076R should do it ....but with lots of boost!!!

Send Rhinorebel on this site a PM, he has the exact set up you mention, It is very responsive and makes solid power, im sure he can shed more light on his experiences with the set up and any potential problems (he had a few along the way)

Hey buddy. Call Jeff at Marine International Diesel (MIDI) in Ft Lauderdale florida (tell him justin sent you). He's a Precision Turbo dealer. He also runs around the carib/islands alot. I just bought a PT5557B for under 1k. It's rated at 550 odd hp, garret based, billet comp wheel, T3 flange, V band dump flange, external gate turbo... Great value!!! Jeff also has a MEAN R33GTR with a large Precision Turbo.... awsome!

You can always mod the manifold to fitt up the turbo and/or wastegate.

What u smokin bro?!?

Last time i checked 450hp was more like 335kw so the GT3076R should do it ....but with lots of boost!!!

rwkw vs flywheel

not that ash needs help defending since what he wrote allows for drivetrain loss.

HKS Bottom Mount Manifold - Actually Have this already

GT3076R 0.82A/R with four bolt turbin housing and V-band add-on

External Wastegate - Not sure what size to go with and also what alternative can I use instead of the HKS that will fit properly on the manifold? I am thinking like a Tial 40mm, your thoughts??

Spare head with the RB26DETT ITBs and Intake Manifold setup - Help eliminate the pipe running over and also a better look same time

Keeping the TCS

RB26DETT 700CC Injectors with HKS/Tomei/Sard Fuel Rail and Resistor pack

RB26 Cam Cover and Center Plate - Bling

Keeping VCT Solenoid

Oil Return from Head

Cosworth Headgasket

Tomei Restrictor and block off as well

ARP Headstuds

Clutch ?????

I really don't want to get in the block if I do get some extra cash and I get an entire spare engine I will get the collar attached to the snout, freshen up the block with bearings, ARP mains and ARP rod bolts also try to adapt the RB26 sump as well. Can I get your thoughts on the setup and also what clutch recommendation for a daily driver that will be at some points be in standstill traffic and on hills as well, not looking for something aggressive but able to handle 450HP. Also, what wastegate option? My management will be a toss up between the Vipec and the Power FC, the Power FC being so expensive now I may swing the Vipec way. Please no bashing on the management but on all other aspects feel free :mrt:.

The ARP mains and head studs are pointless for your power goal. and the 26 sump has nothing of benefit to offer unless you are converting the car to 4wd.

what are you going to use the car for?

if you are going to track it hard and often, then go the restrictors, and arp bolts while you are in there anyway... but if its just a streeter that sees the occasional light hearted track day, then there is no need.

i'd go a 3071, and a set of cam gears and keep good response while not risking the stock internals too much

Send Rhinorebel on this site a PM, he has the exact set up you mention, It is very responsive and makes solid power, im sure he can shed more light on his experiences with the set up and any potential problems (he had a few along the way)

Just sent him a PM to see if he would respond. I thought the GT3076R would be better as 3071R will be at it's limits. The cams may come later on but for now that is what I am thinking of. The twinscroll was always an idea for some quicker spool as it is a twin scroll mani. Thanks for the inputs and keep it coming. Also what is a good street clutch for my application that is nice on the left leg?

nismo supercoppermix twin plate

if you are 100% doing the 26 top end then you'd be stupid not to do the restrictors, so ignore my post.... i kinda just skimmed over the first post...

good street clutch? Super copper mix is awesome but $$

Jim Berry, NPC or Direct Clutch will make to order (ie power level, type of motorsport, etc) and at very reasonable prices.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...