Jump to content
SAU Community

Recommended Posts

Well I am starting the saving process to make an order so that hopefully by year end I can have everything needed for my upgrade. Here is my base and what my plans are and let me know what you think of it.

Base:

ER34 RB25DET Neo - pretty much stock

NGK Iridiums BKR7EX-11 gapped to 0.8

HKS FMIC

Trust 13 row Oil Cooler

Two Core Radiator

Kakimoto 3.5" Exhaust

Blitz ECU

Blitz SSBC

Blitz Timer and Gauge

Trust Air Filter

Defi Boost, Oil Temp, Oil Pressure, Water Temp, EGT

Plans:

HKS Bottom Mount Manifold - Actually Have this already

GT3076R 0.82A/R with four bolt turbin housing and V-band add-on

External Wastegate - Not sure what size to go with and also what alternative can I use instead of the HKS that will fit properly on the manifold? I am thinking like a Tial 40mm, your thoughts??

Spare head with the RB26DETT ITBs and Intake Manifold setup - Help eliminate the pipe running over and also a better look same time

Keeping the TCS

RB26DETT 700CC Injectors with HKS/Tomei/Sard Fuel Rail and Resistor pack

RB26 Cam Cover and Center Plate - Bling

Keeping VCT Solenoid

Oil Return from Head

Cosworth Headgasket

Tomei Restrictor and block off as well

ARP Headstuds

Clutch ?????

I really don't want to get in the block if I do get some extra cash and I get an entire spare engine I will get the collar attached to the snout, freshen up the block with bearings, ARP mains and ARP rod bolts also try to adapt the RB26 sump as well. Can I get your thoughts on the setup and also what clutch recommendation for a daily driver that will be at some points be in standstill traffic and on hills as well, not looking for something aggressive but able to handle 450HP. Also, what wastegate option? My management will be a toss up between the Vipec and the Power FC, the Power FC being so expensive now I may swing the Vipec way. Please no bashing on the management but on all other aspects feel free :mrt:.

How do you plan to keep traction control when you're fitting 26 ITB's? the Neo TCS setup is an additional butterfly in front of the standard throttlebody. Could maybe chop the casting and fit it before the 26 plenum chamber I guess.

US Ebay is your friend for skylines.

I'm in florida... and I just bought heaps of gear here, then sent it home.

The prices are so much cheaper for most things... Hell I bought 2 N1 oil pumps new for 140 each!!!

US spec turbo was better quality for the price than you can buy anywhere in Aus

Fuel gear, AFM's, gaskets etc... all cheaper, even considering the exchange rate and shipping costs.

What u smokin bro?!?

Last time i checked 450hp was more like 335kw so the GT3076R should do it ....but with lots of boost!!!

Last time i checked- 450hp was indeed 335kw. However it is NOT 335rwkw.

Now take off drivetrain losses etc and you are back to around 260-270rwkw give/take.

450hp = @ the motor. That is what the question/requirement was, so therefore that is what i used.

If the OP gets his terminology wrong, then that's not my problem :D

A GT3076 is a 600hp turbo, if you want 450hp, you do not use a GT3076

but why did ash suddenly change it from rwkw to fwkw? i wouls assume that the OP was chasing 450hp at the treads, which is around 335kw.

see above :)

A GT3076 is a 600hp turbo, if you want 450hp, you do not use a GT3076

I've never seen a 600hp 3076, that's 3040/30R territory. Proper 3076's are 500HP. A 3071 can get him 450hp, but not with much head room. A 3076 otoh is pretty much a guaranteed 450hp with supporting mods without that much difference in response.

I've never seen a 600hp 3076, that's 3040/30R territory. Proper 3076's are 500HP. A 3071 can get him 450hp, but not with much head room. A 3076 otoh is pretty much a guaranteed 450hp with supporting mods without that much difference in response.

Garrett rate the 3076 at 525 hp max.

From what I've read, the 3071 is a bit of a dog. Go the 3076 with the 0.63 AR.

Also go ext waste if you can, otherwise specify the 18 psi actuator.

I've got 555 now but expect to get 600 out of it that's for sure.

Always get the most out of life, isn't that what Mum and Dad taught us ?

If it blows, just get a GT4088R ! :D

well you certainly wont have it when you have the 26 plenum... so that part is sorted

as for the light... remove dash - remove bulb - problem soved

3071 in my GTT if that helps, 278.5rwkw @ 17psi. So are we talking at the wheels here or not?

http://forum.nistune.com/viewtopic.php?t=950

From what I've read, the 3071 is a bit of a dog

depends what you mean with no extra lag introduced by bigger turbo and now more balls. see the dyno curves on that link. its a little slower coming on boost than stock but thats about it and makes for a fun and drivable car ...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...