Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

Have you looked at the hi octane sumps? They look like a serious bit of kit and will be what I go for when I build my motor. Some nice internal gating/baffling too

+1 for high octaine sump!! and yeah, needs a bit of cut and wleding

as far as the tomei sump baffel goes i think its either place or screw fit

yeah thats a shame matty fire takes no prisoners or no prejudices

indeed steve, hardest luck story was from the first photo. The guy who lived there lost his first house in the "white flat" fire 2 years ago. his son built the house for him so he had somewhere to live, and he's copped it again. He said to one of the guys i was working with "they sell houseboats on the murray yeah? might be time for me to buy one of them!"

Whats that thingamajig?

-D

thats a "rural padmount" ground level transformer. only uses one phase from the 11kv system (the one cable coming into the "elbow" on the left). Produces 2 phases of 240v for consumer supply. This one WAS feeding 4 houses, but only 2 were left that could be safely re-energised by generators. Note, that was closed during the fire and normal operation, so shows how much heat there would have been

Hope everyone has/or is having a good xmas,

Can anyone recommend a good place to get guards rolled? My tyres seem to like scraping the guards now...

Edited by skwiz
I need some help. I think I've got an inlet leak.

If I rev the engine up and release the throttle , it stalls. But if I take it easy it's fine :P

I'm thinking it's the inlet manifold gasket ?

Any ideas on how to be sure ?

Lose the hektik flutter.... :D

Hope everyone has/or is having a good xmas,

Can anyone recommend a good place to get guards rolled? My tyres seem to like scraping the guards now...

Luke ENR34 is the man to see for guard rolling :D

any idea on prices?

only because i am too lazy to call them.

youre far too lazy for your own good jake.

About $90 a guard, give Luke a pm first mate

what you smoking james? i want some.

bleh, $90 a guard? jesus.

its only $40 a guard for ns members.

ill have to get my guards re-rolled for the cst's, might just get all type to do it.

Edited by scandyflick

I've heard someone say that 98 Octane fuels offered by the different petrol station brands are different in their makeup, and apparently BP ultimate is the better one to use. Is this true or a load of waffle? Does it really matter if someone uses V Power or BP Ultimate or Vortex 98?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...