Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

Are you ok Cara? Any updates on your friend?

Sorry to hear about the cars involved but your health and your friend's health are way more important. I hope everything works out ok.

my friend had surgery on his back today not sure what for, and i dont know whats happening but im going to the hospital tomorow to see him

As i have just admitted to being a cheap-ass in The Spotted Thread I am going to post an interesting link, Here, to rebuilding brake calipers - As i am replacing my Pads, Rotors, and going Braided Lines for the Track Day, I may as well renew the calipers too.

As i have just admitted to being a cheap-ass in The Spotted Thread I am going to post an interesting link, Here, to rebuilding brake calipers - As i am replacing my Pads, Rotors, and going Braided Lines for the Track Day, I may as well renew the calipers too.

I did the caliper seals, makes a load of difference.... 20 yr old calipers vs as new... no contest

-D

I'll stop whoring it up in the spotted thread, that DIY looks good. extremes are good if your good to them lol

Yeah, ATM i am going easy on it as i am "bedding in" the clutch and new flywheel.

I'll stop whoring it up in the spotted thread, that DIY looks good. extremes are good if your good to them lol

Only thing I dont like about mine is it doesnt fully disengage the gearbox when it gets alot of heat into it. As for pedal feel? A few members here have driven my car and they have all said it has a great pedal...

EDIT: If you want to hear something really interesting, give Jim Berry a call and ask him about his opinion of Extreme Clutches...

Only thing I dont like about mine is it doesnt fully disengage the gearbox when it gets alot of heat into it. As for pedal feel? A few members here have driven my car and they have all said it has a great pedal...

EDIT: If you want to hear something really interesting, give Jim Berry a call and ask him about his opinion of Extreme Clutches...

Definitely not a good thing.

Only thing I dont like about mine is it doesnt fully disengage the gearbox when it gets alot of heat into it. As for pedal feel? A few members here have driven my car and they have all said it has a great pedal...

EDIT: If you want to hear something really interesting, give Jim Berry a call and ask him about his opinion of Extreme Clutches...

should i set the day aside for the call or?..

well back from Canberra/Sydney had an awesome time

only saw about 5 skylines and about 3 coppers so that's a great ratio

sorry to hear of your accident Cara, hope your mate recovers well

why dont you get the R Vu your looking for a 32

ive had my current Extreme in for about 14 months i think

i know its not a skyline people, but your a pretty switched on bunch of peepz,

does anyone know the stuf pattern size for a rx7 series 4 and what other car rims will fit on here.

I have searched google no results, asked mates they all look at me like im planning on giving the thing a good hiding it deserves. p.s sorry bout bad spelling had a few too many. need to get some stockies or decent type rims, and no i wont be doing burnouts on the road, i got no licence to do that anyway.

He won't get one... hes so worried about it not being the perfect one that he'll never actually find a GT-R aha

perfection only goes so far as your wallet allows

note the aus delivered r32 gtr and the one with less than 10,000km milage being advertised on carsales, but each one was over $40k ($65k for the aus delivered one)

-D

He won't get one... hes so worried about it not being the perfect one that he'll never actually find a GT-R aha

If he wants perfect, he will need to increase his budget substantially...

EDIT: Beaten by Dohmar

i think 13k is worth the risk that it might be a genuine sale fly to Perth have a look @ it buy it and put it on the train for home then spend $1000 change all fluids and get leak down and compression tests done so you know what your dealing with

if it has poor compression drive it easy if its all good smile all the way to the track

EDIT

if i had the abilities to acquire 13k i would snap it up today

I totally agree with both dohmar and heslo, hence why I spent the amount of money on my GT-R that I did. I can see that GT-R being a nugget and chewing a bearing straight away, personally I'd steer clear.

Edited by Weezy
I totally agree with both dohmar and heslo, hence why I spent the amount of money on my GT-R that I did. I can see that GT-R being a nugget and chewing a bearing straight away, personally I'd steer clear.

its not too bad, tho you're right about the engine, you'd probably want to rebuild the engine straight away for peace of mind, or just strip the car down as much as possible and use it as a track mule till it breaks

i wouldn't mind a 2nd gtr which I can nick parts off

-D

Edit - Having had a look at the pictures, the engine bay looks like its in pretty decent nick and the interior looks good too (no tell-tale bubble on the dashboard)

If your budget was $25k, then getting this one for $13k and spending $12k on replacement parts would be a fun thing to do

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...