Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

http://www.adelaidenow.com.au/motorcylist-...u-1225879513502

Very, very close to where I had my accident, and the cyclist was travelling in the same direction I was. Makes my stomach churn just thinking about it. RIP to the biker :)

+1

That section of road is rubbish. Had a mate go down probably that same corner too. We had to use a car to remove his bike from being wedged into the guard rail. He was busted up pretty bad, but nothing life threatening.

Does anyone know how to fit a lift kit to a hilux?

I'm sure I could do it myself, but I've never done it before and rather someone who's done it before help out :)

please help so I can fit some 35" tread!!!

suspension lift kye? if so it'll be easy as

spring and shock are normally separate, so its just a case of out with the old in with the new

Anywhere in Adelaide that will service/diagnose some Cusco coilovers that are knocking?

So far I've tried Manta but they didn't want to touch them.

Pillow ball mounts are stuffed....get rid of them.

Rubber mounts are fine for the street and occasional track work (and much quieter)....unless it's a track car, why bother with those things.

best way to remove battery corrosion?

soapy water and a rag?

baking soda and warm water in a small cup , into a paste then spread on corrosion, rinse with fresh water, but DO NOT get into open cells where you fill water

think you meant distilled water weezy ? it goes inside the battery

random car porn

gt1.jpg

i gotta do my whole boot :D

mix it in a sprayer a lot thinner it should bubble a lot then rinse with cool fresh water then dry,,,, any thick corrosion use a toothbrush or soft scrubber..

have fun...lol

PS it eats clothes slowly so do it with old crappy ones

only cost a few bucks to do it, look in the baking isle for baking soda

mix it in a sprayer a lot thinner it should bubble a lot then rinse with cool fresh water then dry,,,, any thick corrosion use a toothbrush or soft scrubber..

have fun...lol

PS it eats clothes slowly so do it with old crappy ones

only cost a few bucks to do it, look in the baking isle for baking soda

ive got a box of baking soda in the kitchen

just trying to work out what mixture to use as the last time i did it , well failed epicly because corrosion is back again ...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...