Jump to content
SAU Community

Recommended Posts

i spotted a white r33 on campbelltown rd with a really hot chick in it and it was me
I didnt see any hot chick driving

Maybe i need glasses :bahaha:

Confidence is good but can be mistaken for arrogance

oops did i say that :bahaha:

Orange R33 turning into Stanhope Road Killara from the Pacific Highway at approx 6:50am this morning. I waved

Oh and I was in the city last night on Macquarie Street heading towards the harbour bridge when a silver r32 gts-t going the other way pulled up along side me. We had a good 5min convo while stuck in traffic :)

spotted MADGTR turning onto Blues Point Road in North Sydney...I was crossing the road staring in awe....I waved too! lol

Liz,

Sorry I missed you I took an old friend from WA for a little squirt. He had to change his underwear by the time we got back. He is going to sell his '02 STI and buy an R34, yet another one converted.

Liz,

  Sorry I missed you I took an old friend from WA for a little squirt. He had to change his underwear my the time we got back. He is going to sell his '02 STI and buy an R34, yet another one converted.

haha, sounds like your doing your part for society!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...