Jump to content
SAU Community

Recommended Posts

Maroon R33 last night at the lights at Blakehurst. Gave the thumbs up and then he launched it hard. Nice twin cannon setup and the sound was mad.

Then saw an RBT down the road so i flogged it past them, still didnt catch up with the 33, dude he must have been fcuking hooning!

"FEAR"

ATTENTION ALL SKYLINE DRIVERS AND LOVERS

THE ULTIMATE SPOTTING......

SPOTTED

BLACK R32 GTR WITH CARBON FIBRE BONNET

NUMBER PLATE "FEAR"

SPOTTED THE OTHER DAY ON A DRIVEWAY. IT DIDNT EVEN MOVE BUT IT SMASHED ME OFF THE LINE.

WATCH OUT, THIS IS THE ULTIMATE SPOTTERS CAR.

Thats the first time ive been spotted! BOOYEAH!

I hope all the times you spot me im doing the right thing (redline + flatchange)............... jks .

can't remember if it was you or not, but looked suspisciously similar to your ride, very similar rims, R32 GTS-t, did that exact thing up that hill in miranda, next to miranda fair, on the far side near that carpark entrance. If it was you, heard you bouncing off your rev limiter a few times, then i turned and looked at the apprentice next to me and said "that can't be healthy" :angry:

mine is only 2500km old engine but the limiter was close to 8500rpm which was a bit higher then i thought they were

so THAT'S why i haven't hit it :angry:

Just haven't been bothered/been too cautious to rev it like that

i had an intresting noise last night. i was going down Tudor road into bonnet bay. the "clock" was almost full if you know what i mean and i heard this huge BANG! and thought id really fcuked something.

i slowed down and check a few things and couldnt see anything out of the ordinary, check all looked for stuff leaking.

Im soughta scared to think what it is. it wasnt a bang from hitting some debreee or anything like that. but everything is fine. NFI what it was but if its bad i guess ill find out.........

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...