Jump to content
SAU Community

Recommended Posts

Spotted a Silver R33 GTST (no spoiler) with a GTR badge on the back..

Plates were AB 52 ?? or something of such.

If you're on here.. we were in the white R33 S2 GTST (with VIC plates) that was having fun with you at all those traffic lights ;)

saw d00dz on southern cross drive coming towards the city out of the runway tunnel today at around 430pm :) i was coming the other way.

YEA :wavey:

I saw a skyline looked like urs and thought it might be urs :P

I saw a black 33gtst,grey 34 gtt and a 33 gts-4 arround ingleburn shops and station 2day.The most i have seen there at any 1 time

The gts4 was dark green and had a www.skylinesaustralia.com sticker on the back window.

Its blue, not green! :rofl: thats the first time anyone has spotted me :P

seen a bunch of skylines over the past few weeks...

Saw Jono at newport arms just before chrissy, car is as beautiful as ever.

Saw a nice Gtst on king georges rd the other day, i pulled in behind him at a servo, plates were GT - XXX (replace X with a number, just keeping it private)

Also saw a nice SII Gtst turning onto Mona Vale rd, we both waved..

I am getting a bit upset at the lack of response tho when I wave/flash (my lights, that is).

C

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...