Jump to content
SAU Community

Recommended Posts

A Maroon R33 Pulled into my work car park in Norwest, I think his misses was driving the car, she was very carefull on the driveway.

I was the guy havin a smoke on the balcony!

Cheers

Josh

Spotted and drove behind a Silver R34 GT-T Coupe with a nice blonde at the wheel, tried to her attention but not sure if it worked.

Her plates: AWU-70F - was driving along pennant hills rd this arvo around 3:50pm..

Drew.

spotted babak!!!! GTR026 driving around somewhere! :laugh:
nah its not ;) its a purple 33 gtr :mad: merlis old beasty!!! shes got red number plates!

(i'm pretty sure its merlis old and babaks new car!)

Mona, is that babak as in TUFKA (The User Formerly Known As) kabab? That is super-super "olde skoole!"

Wonder if he still is the owner?

Also remembered seeing a White R34 GT-T 4 Door Sedan with wing and body kit outside North Shore Prestige on the main Rd opposite the petrol station driving along (cant remember the name of the main rd) would have been around 5pm i think.

Drew.

Mona, is that babak as in TUFKA (The User Formerly Known As) kabab? That is super-super "olde skoole!"

Wonder if he still is the owner?

as in kebab :( don't know that other name! and yesss old schoooll! :) didn't see the driver, so not sure if he still does :P

nah its not :happy: its a purple 33 gtr :laugh: merlis old beasty!!! shes got red number plates!

(i'm pretty sure its merlis old and babaks new car!)

hmmm interesting i cud of swarn i saw those plates on a blue 34 gtr around the brighton area.... coz i remember pointing it out to my girl friend... thats why i remembered the plates

nah its not :happy: its a purple 33 gtr :laugh: merlis old beasty!!! shes got red number plates!

(i'm pretty sure its merlis old and babaks new car!)

Yep thats Kabab :no: As in Babak, as in always been Kabab, right back to the says od SDU

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...