Jump to content
SAU Community

Recommended Posts

ha!, so now you're stalking me?!?. i'll have to keep an eye out for you, how many other skylines do you have??.

No, not me, I believe Tosh is the stalker :laugh: It seems you and I occasionally cross paths on my drive home from work.

:woot:

ok, so if blitz gets around, and marsss is a manwhore who is tosh-teh-stalker?!??!

this is all a little confusing for a blonde......

Lucky for you Tosh is not in the country right now, so for the moment you are safe :D

I'm not stalker... leave me out of this! :mellow:

Bec, I see you often driving to work in the mornings into North Ryde. I work in Drummoyne so pass through North Ryde in the mornings. I drive a black Honda Accord Euro

Spotted Mass working hard last night, i was consuming massive amounts of gelato he was feeding me...

damn thats good gelato!

hahaha yes sir!! :mad:

did u here that guys, awesome gelato, come down and try some :( then buy some :mellow:

Spotted "KUR53D" at Chatswood nearly everyday this week. White S2 33. Howdy :-)

Also spotted a "Buddy Club" maroon 33 at North Ryde.

I beeped you the other day on Delhi road but you were too busy focusing on getting the apex right as you went up the hill :O

hey thats right its pink lol,

yeah always sees it down main st btown, while at work, so aint quick aye..kk,

cheers dude :)

yeh lol same me, i always see it there too... i also see it heaps in rushcutters bay, parked elvis pizza on bayswater rd near the rub n tug lol... makes me think wat they are doin parked there :)

Just spotted a midnight purpler R33GTR on Goulburn Street underneath my work - ARM51U - nice wheels :)

Will be cruising in a GTS-R on Saturday night - keep an eye out for it boys n girls :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...