Jump to content
SAU Community

Recommended Posts

Spotted a red R34 [AJ 45 ZZ] on the M5 from Homebush Bay Dr @ about quarter past 6 then i turned off at Cumberland Hwy.

Spotted a white R33 [bLU 79Y] on the Cumberland Hwy @ about 6.30ish

he used to own my car :) still got the 4 door i see, twas up for sale a lil while ago

Yeah I heard he was going to sell it as they bought a house... guess he managed a way around it :)

ok then cool it wasn't me. Cos i was around windsor n i hav a blue 4 door r32

Are you old and Indian? What's Funky Munky's dad driving these days. He had the Cefiro last time I knew.

Adam,

i was guy in the white r33 that crossed ur path several times on saturday....saw u twice on the way to seven hills even tho we went different ways on the detour and then on the way back i saw u again twice....that was freaky....seriously at least 4 hours in between....i recognised u from the dyno day a few weeks back.....

Ahh, I thought I recognised you but just wasn't sure at all.

i saw u, i saw u....im not a snob.....i let u in when the lane suddenly ended on the cumberland hwy....then saw u whip it around when messing around with that bloody detour....

i actually was saying to the misus just before we spotted u again....wouldnt it be funny if we ran into you again....

Yes I remember you letting me in there. Everytime I looked over you were looking the other way though.

I think your mrs likes my car man. Watch out! hehe j/k. :D

drove next toand behind a white 33 series 2

YUM 087

from chatswood to the F3

If you are on here, Hi!

Howdy Mr Weevil

Twas me !

I thought it was you cause of your avatar photo and the Horsnby connection.

Saw Anthony-GuiltToy on the way home on the F3 too

AYY 56Q i think it was... gun metal grey R32 GTR on pac highway in waitara sorta... we were in the other 32 :action-smiley-069: damn that thing looked fast!

hello if your on here...

and yes that was a chick driving... Jess, known on here as Sinful (plates are SINISTER... sort of...)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
×
×
  • Create New...