Jump to content
SAU Community

Recommended Posts

at carlingford road tonight at 7:20 there was 3 R33's in a row waiting at the traffic lights approaching Pennant Hills road, me, a white r33 series one in the middle, and another silver on the other side, pretty cool sight.... too bad the white r33 guy drove like a douche accelerating all the time while he should really just be cruising.... he looked angry and all that, looks like somebody had just as shitty day as me, atleast his car was in good nick

I work just around the corner from there in the Alfa workshop!!

there is also a very nice silver kitted R34 gtt that parks there!

Yeah that 34 is very nice. Used to see it there all the time.

I work up at mazda now around the corner. Small world!

Yeah that 34 is very nice. Used to see it there all the time.

I work up at mazda now around the corner. Small world!

Ahh euro cars!! U know chris in the workshop...lives up at gosford way!!

Spotted a silver 34 in the army barracks at moorebank tonight, have seen it their quite a bit actually.

mm what you doing there lol..

Spotted a gold R32 GTR in penrith tonight, plates were "AXN.03Q"

and

a Gun grey R32 Gtst on sunnyholt rd, plates were" AJ.96.LI"

mm what you doing there lol..

Spotted a gold R32 GTR in penrith tonight, plates were "AXN.03Q"

and

a Gun grey R32 Gtst on sunnyholt rd, plates were" AJ.96.LI"

lol my mates in the army he lives on base their im usually their once a week or so

spotted mr GOLDZILLA in his stagea at pennant hills heading north bound past boundary road at about 7:20ish tonight

Oh, I didn't see you Tom, were you in stealth mode in some other car?

Oh, I didn't see you Tom, were you in stealth mode in some other car?

nope i was in the line with the lights on, i don't know how you missed the back of the car (looks like an electric stove top), you drove right next to me lol..... i guess their was traffic and you were approaching the traffic lights and their were trucks around aswell, i guess you were doing what we all should be doing and actually paying attention to the roads lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...