Jump to content
SAU Community

Recommended Posts

i had an intresting noise last night. i was going down Tudor road into bonnet bay. the "clock" was almost full if you know what i mean and i heard this huge BANG! and thought id really fcuked something.

i slowed down and check a few things and couldnt see anything out of the ordinary, check all looked for stuff leaking.

Im soughta scared to think what it is. it wasnt a bang from hitting some debreee or anything like that. but everything is fine. NFI what it was but if its bad i guess ill find out.........

i get that a bit :P

cept it's more like pops and mild "bangs", just the exhaust backfiring :S

Spotted Duncan's yellow GTR at an undisclosed location :(

Also spotted a silver r33 with a NISMO sticker on the back windscreen and a fusion sticker on the front. I'm sure you saw me and I saw you yesterday aswell closer to my area.

Spotted Duncan's yellow GTR at an undisclosed location :D

hahaha what gave away it was my car? Nath called today and said it was ready to go, so we are GO! for round 6 of the state champs :cheers:

what were you getting done?

777That's only because the Northern Beaches ROCK!

On my way home:

R33 next to an old Commodore on the bridge, left it for dead! R32 and R33 at Chatswood around 7:30pm.

Then my R34 sitting in the garage at home :cheers:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...