Jump to content
SAU Community

Recommended Posts

hey guys picked up my r33 yesterday and has a mad hesitation not only on boost but even down low, when accelerating it hesitates, then power comes in then hesitates once again.

today i changed the fuel filter finding the filter itself inside the housing was rattling around. it made it slightly better.

the car has a large bosch fuel pump in it and the next stage it to replace that.

if anyone has had anything similar in the past i would like to hear about it.

Thanks, Paul

Link to comment
https://www.sau.com.au/forums/topic/292026-hesitation-on-acceleration/
Share on other sites

Im having the same problem in the 32, from the research ive done it could be a) the AFM(s) if so give them a clean, b) the spark plugs, if so grab some new ones c) coilpacks, silicone them up or replace them or d) 02 sensor, this is a bitch to check but ive decided to bite the bullet and get them replaced for peace of mind. Im installing new plugs and coils today, well let you know how it goes. In the mean time theres a sticky'd 02 sensor section or go here http://www.skylinesaustralia.com/forums/Mi...sensor+problems for the other ideas ( he had a 33 gtst aswell)

Edited by CGB_R32

It's not the f#$%^n O2 sensor - its input is totally disregarded by the ECU during acceleration!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! How many F$%^&*N times does it have to be said!!!!!!!!!!!

[/rant]

Now, I know you've only had the car for 1 day, but what mods does it have? Aftermarket ECU? Atmo BOV? Anything else?

Now, I know you've only had the car for 1 day, but what mods does it have? Aftermarket ECU? Atmo BOV? Anything else?

thanks for the help,

umm its got forged pistons, cams, big garret turbo, full exhaust with extractors, full motec, front mount, bov, upgraded fuel system, upgraded ignition system, rims, all whiteline suspension + more i cant think of.

It's not the f#$%^n O2 sensor - its input is totally disregarded by the ECU during acceleration!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! How many F$%^&*N times does it have to be said!!!!!!!!!!!

[/rant]

Now, I know you've only had the car for 1 day, but what mods does it have? Aftermarket ECU? Atmo BOV? Anything else?

i'm guessing quite a lot more times yet, LOL

i'd start with the simple things like plugs and work your way from there.

i had something similar with my SR 180 when i first bought it. tried everything, ended up being the fuel pump.

what plugs are you running, maybe you need something hotter... had some shitty hestitation when i swapped engines in the 180, swap from plat plugs to copper ones fixed that. worth a shot at $3 each :D

It's not the f#$%^n O2 sensor - its input is totally disregarded by the ECU during acceleration!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! How many F$%^&*N times does it have to be said!!!!!!!!!!!

[/rant]

Now, I know you've only had the car for 1 day, but what mods does it have? Aftermarket ECU? Atmo BOV? Anything else?

I stand corrected.........................wacked in the new spitfires and plugs and yay no hesitation any more!

im running iridium plugs, and they look near new. coils are good too not arcing around edges.

im a mechanic so i have run fuel pressure tests to eliminate the fuel system.

i have also quenched the cam sensor and that made no difference

took out plugs and coils today to check them, put it back in and didnt seem as bad, took longer then usual for it to start stuffing up i think i might fill the plugs with a grease to see if that fixes it.

yea the thing is its running full motec and i highly doubt that will shit itself. i have to get a cable for the motec to plug a laptop in and see hte problem,

again this avro will b more diagnosing and ill see how i go, thanks for the help so far guys

I thought oxygen sensors remained in use (closed loop) until wide open throttle, i.e. until the throttle position sensor is maxed out it's still going to be used?

did abit more work today, tomorrow i am putting my mates r33 coils in my car and seeing how it runs. hopefully better.

gota do a few little things like change belts, service, brake fluid flush ect, and polish it too so its a big weekend for me!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
    • Cam seals go hard. It's a very old car.
×
×
  • Create New...