Jump to content
SAU Community

Recommended Posts

well obviously im wondering how much of a difference in handling the front strut bar makes

ive lowered my car and taken out the entire a/c system and shifted the batter to the rear of the car and already it handles about a thousand times better

i almost got one put on the car when i lowered it, but the shop that installed my new shocks and lowered the car reckoned that because of the suspension design on the front of skylines, a strut bar doesnt make much difference, but obviously it must make a difference if a gtr gets one.... right?

what do you guys/girls think?

thanks!

Edited by AYW550

Find a new suspension shop. Strut bar is, IMO, a great benefit. Tying the strut tops together helps to stiffen the car up and stops a lot of body flex whic saps performance through the twisty stuff. Just go and get one you know you want to.

I agree with rb ryan!

the top of the strut/shock takes sfa force in a double wishbone setup like skyline compared to say a silvia with strut front suspension. the force is on the inner end of the upper and lower control arm which are not really braced by a strut brace.

btw also gtrs did not come with a strut bar, except n1.

btw also gtrs did not come with a strut bar, except n1.

Really? I thought they did. Mine does and I only wish it were an N1 (although no rear wiper like an N1). Pretty much every GTR I've ever seen has them.

An the extra bracing on the GTR is amazing - there are "extra" bits all over under the car.

yeah seems like a split descision really, id want one for looks just as much as for handling benefits, (but doesnt seem like there are many) any one driven their car before and after a strut brace?

also, how much do they get in the way of working on your car? like in the way of the intake and stuff, would be a pain to tkae it off and on whenever i was under the hood

Edited by AYW550

not sure about the technical suspension setups, but having installed a cusco front brace on my s2 33 just on the weekend, i can tell you GET ONE!!!

I only have shocks, not coilovers - and ive heard that with coilovers the difference is minimal but shocks is definitely recommended.

the difference is actually amazing. Maybe its just my driving style or the way the car is set up but i find now the steering feels much lighter, and the front grip has increased dramatically. For $150 - 200 for a decent one i would not think twice - my opinion now is that they are quite underrated.

As for working on the engine, it seems they are easy to remove (4 nuts) so personally i wouldn't worry about it too much.

Hope that helps :)

One of the first changes I made to my 33 and noticed the difference straight away. Car was more responsive on turn in at normal road speeds let alone track. Get one and you will see.

Edited by skylinecouple
I agree with rb ryan!

the top of the strut/shock takes sfa force in a double wishbone setup like skyline compared to say a silvia with strut front suspension. the force is on the inner end of the upper and lower control arm which are not really braced by a strut brace.

btw also gtrs did not come with a strut bar, except n1.

My R34 sedan got a stock strut brace...

And there are alot of R34s out there that has it stock. :)

I too noticed a tighter and more direct front end.

She is a little bulky with the front diff and half shafts etc though.

The only thing a rear one did was add a little weight to the car.

  • 2 weeks later...

Another benefit you will hopefully not have to find out, is that it does supply extra body rigidity in in an accident..my friend found out the hard way..but was told the car would have been alot worse off had the brace not been there after he put his the front corner of his car into a wall

My car has coilovers and front and rear strut braces and it feels mega tight more like a smaller more nimble car thru the corners,

on saying that i aint drove a std skyline without one, so cant really compare but if mine is anything to go buy they go nice and tight :D

Another benefit you will hopefully not have to find out, is that it does supply extra body rigidity in in an accident..my friend found out the hard way..but was told the car would have been alot worse off had the brace not been there after he put his the front corner of his car into a wall

Do you want more rigidity at the front though?

What you want in a crash is for the driver compartment to stay intact but for everything else to deform/yield and absorb the energy. i.e crumble zones etc. That way the rate of deceleration on the driver/passengers is less.

If you're adding rigidity/strength to the front it's the opposite effect surely?

Tony i think what doozooby was referring to may have been a side impact crash...

i agree with you that a head on crash increasing the rigity may not necesarilly be a good thing, but then again i suppose its not front-back rigidity, its side to side...but im no crash tester expert lol.

Either way i think the question has been answered - handling is improved :D

Do you want more rigidity at the front though?

What you want in a crash is for the driver compartment to stay intact but for everything else to deform/yield and absorb the energy. i.e crumble zones etc. That way the rate of deceleration on the driver/passengers is less.

If you're adding rigidity/strength to the front it's the opposite effect surely?

front = decent amount

rear = not a lot

the strut brace holds not too far away from the upper link at the front, stopping this sideways distortion helps a lot, especially mid corner understeer.

rear does f**k all as all ur links are connected to the subframe, which ur strut brace is no where near. u can add bracing to the subframe, which is the equivilent of a strut brace on the front, but ur talking about nowhere near the amount of flex.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...