Jump to content
SAU Community

Recommended Posts

Hey guys, my friend just bought a series 1 33gtst, and on the dash, left side of the steering wheel, there's 2 buttons,,one says spoiler up and the other is spoiler down.

Now the car just has the normal S1 spoiler on it, we tried pressing the buttons and having a look over the car but it seems to do nothing. the buttons themselves look pretty standard (like they came stock with the car).

just wanna kno if any of u guys have or hav ever seen this.. i couldnt get a pic of it today, but will as soon as i see my friend.

the car was imported by the previous owner and he had no idea wat the buttons did.

wat u guys think?

chrrz

Ben

Link to comment
https://www.sau.com.au/forums/topic/294465-spoiler-up-spoiler-down-buttons/
Share on other sites

yeh strange, my mates 32 gtst has it too!

maybe jdm optional extra from the dealership?

yeah it is strange,,it doesnt seem to do anything at all though :D ..

we thought it could be somethin around the front bumper,,but nah, nothing there..

yeh, wud b an extra, but isnt doin anythin atm

Nissan did it factory in my R32 GTST. I checked on FAST and its definately meant to be there. All i have left is the buttons. The spoiler and actuators are sitting in my shed... probably about 25kg worth! :(

I have seen something similar in an old mate's car - (s1 33 gtst auto). It adjusted something at the front of the car, under/behind the front bar. I too mentioned "wtf?" at the time.

But it definitely used to adjust, you could hear the little motor going off - similar to the sound of your mirrors folding in and out.

I should have got a pic on the weekend but my friend said he'd send me one, so just waiting on that..its basically on the right of the aircon unit, jus 2 buttons one above the other.

yeah the head unit is an upgraded one and the arial works fine.

hey Psymon, so your car came with an adjustable spoiler? whars it look like?

pretty sure its for the spoiler under the front bar. look under the front bar and get your mate to hit the switches. should see a flap aKa spolier move up or down

Ah yeah, coz the car's got an m spec body kit, its a 1.5. but the front bumper looks like the old series 1. we were just thinkin of putting a lip on it to make it look better..maybe it already has one.. we'll hav a look wen i see him

I should have got a pic on the weekend but my friend said he'd send me one, so just waiting on that..its basically on the right of the aircon unit, jus 2 buttons one above the other.

yeah the head unit is an upgraded one and the arial works fine.

hey Psymon, so your car came with an adjustable spoiler? whars it look like?

Yeah just a metal lip behind/under the front bumber basically that would move up and down when the buttons were hit.

From what i gather they usually get removed because they're quite heavy and the actuators break and cost a lot to replace. I've never actually seen a working one!

yeah my HR31 owning mates had them on their Passage and GTS-X respectively, the problem with em is that you can't really fit a front mount cooler around them at all, and yeah the motors are fairly heavy. They look cool though :P It pisses me off that the model earlier has stuff like rain sensing wipers, auto headlights and auto spoiler, but my R32 has none :P. From what I've read they were an option across the R32 range, though I've never actually see one. Dunno about R33, but maybe so.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...