Jump to content
SAU Community

Recommended Posts

New combo came up nicely, for only 18psi, i expect to see boost come in around 200rpm earlier on the final tune and at least 420-430rwkw. We have gained 50NM of torque from 5500rpm onwards. Unfortunatly the dyno shot i posted rolls over @ 7400rpm but it hit my next load point and dropped into my safety zone of 10.5:1 afr. The final runs actually ran strong all the way to 8800rpm and the last run made over 600nm from 5500rpm but the graph is incomplete so ive left it off. Car should go back on the dyno in a week or so.

Blitz K5-660R turbo #9 rear (0.73ish)

New R34 crank, grub screwed

ATi 1000hp balancer

King bearings

Ferrea 1mm oversize valves in and ex.

Ferrea Titanium retainers and collets

Ferrea Double valve springs

Ferrea Spring locators

New Genuine buckets and shims

New guides

Greddy pro cams 264 9.7mm lift cams (babies)

Greddy pistons

Total seal rings

H-beam rods

ARP head,main and cam cap bolts.

King bearings

Greddy oil pump

MLS head gasket

Status Oil restrictor kit

Greddy Plenum

Greddy 100mm cooler

Saber 12 row oil cooler (blue type)

Greddy Type R BOV... i know dark side, will used for later 2bar tests.

High capacity sump

post-34927-1257333841_thumb.jpg

post-34927-1257334538_thumb.jpg

Edited by URAS

toit! like a toiger.

very good mate. It really is a good set-up.

now I need an answer that's a bit OT. I'm about to put the greddy easy cams into the SR, 256/264 10.5/10.5 but should I bother fitting cam gears too? I think you said not to bother getting any with the current set-up. but someone else now tells me he reckons there is 20kw in it on an SR with small-ish cams by adjusting the gears. I know my experience from RBs tells me sometimes there is (GTR with stock cams) and sometimes there isn't (other GTR set-ups).

toit! like a toiger.

very good mate. It really is a good set-up.

now I need an answer that's a bit OT. I'm about to put the greddy easy cams into the SR, 256/264 10.5/10.5 but should I bother fitting cam gears too? I think you said not to bother getting any with the current set-up. but someone else now tells me he reckons there is 20kw in it on an SR with small-ish cams by adjusting the gears. I know my experience from RBs tells me sometimes there is (GTR with stock cams) and sometimes there isn't (other GTR set-ups).

not a chance, seriously spend it on hookers and crack.... haha na there is no missing 20 with these cams and the T518Z unlike the BC gear which is ground up to 12 degrees out and need the gears just to dial them in @ zero :D

engines coming out to do back to back testing on combustion chamber mods (quench chamber removal) so next week we will have definitive data on its merits.

Edited by URAS
Are you still planning on painting the car one color or is cat going to be running DA in it next year?

yeah soon it will be repainted, we have a corporate ride day set up at sandown in a fortnight so after that we will get it back up to scratch in new shop colours.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...