Jump to content
SAU Community

Recommended Posts

I have a 240K C110 thats been sitting in a paddock for about 10 years. Also have a 260Z thats been there for a few years aswell...

Just wondering if it would be worth stripping and selling them. Is there a demand for parts at all?

Is the 240K a manual or auto ?,

if its a manual, I dibs the clutch / brake peddles, and the clutch slave cylinder, and the gearbox shift leaver and pin, and the floor gearstick boot

if you not wanting to much for them.

Nigel

Edited by noddle
  • 2 weeks later...
  • 2 months later...

Finally have some pictures of the car.

Unfortunately, as the pictures show, the car was smashed up by someone and a few parts stripped since it was parked. :)

The only part I want to keep are the rims. Feel free to PM me an offer for the whole car or let me know if you want to have a look at it in person.

post-4688-1266102227_thumb.jpg

post-4688-1266102290_thumb.jpg

post-4688-1266102315_thumb.jpg

post-4688-1266102336_thumb.jpg

post-4688-1266102351_thumb.jpg

Edited by Priestley
On the way home I took a backstreet in Seymour I've never been down and came across another 240K coupe shell sitting in someones yard. I took a couple of pics that I'll try and upload later today.

well look at that, the c110 gods must have blessed you :)

Edited by Dan_J
well look at that, the c110 gods must have blessed you :down:

I think the gods are telling me to restore a C110.

This one is just a shell and had front left damage. Couldn't get a really good look at it, but if anyones interested I can let you know where it is and you can have a talk to the owner.

post-4688-1267416954_thumb.jpg

post-4688-1267417086_thumb.jpg

post-4688-1267417106_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...