Jump to content
SAU Community

Off To Japan For A Couple Of Weeks.....any Tips?


Recommended Posts

Hey ppl,

I'm off to Japan in a couple of weeks and I was just wanting to know who's been there before and whats worth checking out given the time frames I have to work with.

I'll be in Osaka for 4 days, Hakuba for 5 and Tokyo for 7.

Let me know where you've been (good or bad). Any advice would be much appreciated.

Cheers,

Steve

When are you going?

There is the Tokyo Auto Salon in Jan. Around the 10th i think from memory.

15th - 17th of Jan which is when I'll be over there.

My two weeks in Japan on JDMST, post 60 onwards: http://forum.jdmstyletuning.com/showthread...1573&page=3

You'll need to sign up to read it.

Make sure you have a JR pass for the two weeks, I used mine a freaking lot!

Don't stress about train systems, the private ones just get the cheapest ticket and pay the difference at the other end if you need to.

Also, if you are changing lines at a private station (metro etc) then make sure you dont put your ticket in an orange labeled machine (it will take it thinking you are leaving the station)

Pre book your shinkansen seats a day or two in advance so you can get a train at a decent time, however if you get on at a station at the start of the trip you can usually get a seat in a non reserved carriage.

Not all toilets in regional areas have western toilet bowls (makes an interesting event in the dunny)

Make sure you know what you want to do the day before hand, and dont be suprised if you cannot find the thing you are looking for.

People in Tokyo may say they dont speak english but a lot understand a little.

Try to work out the kanji for beed, pork, chicken, tempura, prawn etc. It helps a lot in restaurants!!!!!

Hope your single, the girls in Tokyo are f**king HAWTTTTT!

If you want to do car stuff try to get onto someone who is hooked up before you go, unless you speak the language and get a chance to stop and talk to someone who looks in the know you may be shit out of luck.

Dont be concearned with the feeling of xenophibia on the trains, Japanese dont really like having a whitie in their personal space. In restaurants they are fine serving you etc, but other than that I noticed a fair bit of racism. End of the day its their country, irony is the obsession with western culture :P

Tokyo for me was very different to the rest of the country, but Im not sure about Osaka.

Any other questions PM me.

OH and dont expect to see alot of jap performance cars around.

You will see millions of taxis, little cars like micra, and european cars.

Most of the jap performance i was was out of the cities.

And...If you like Anime check out the Ghibli museum, freaking amazing!

hm ok well as it appears your all going over there, who wants yo find me a low mount t67 kit for my rb25???? :P

From trust? No such thing, T67 comes in kits SR20 only. Can buy it separate and make a manifold, doubt it will fit, the comp cover is as big if not bigger than to T04S comp cover that comes with the GT30/35 series turbos from garrett. I managed to get a GT30 to just fit on mine, but I decided it was too close and went high mount.

Off topic sorry :D

I have only ever found 1 low mount manifold which was on ebay from jps trading on ebay....sadly before i bought it the person I told about it bought it instead....then on sold it...and it wasnt to me no doubt for much more than the cheap price it was purchased for. The t67 I'm pretty sure did fit on it.

Thems the breaks though.

Still on the hunt for the same manifold...which I doubt ill ever find :P

more off topic...sorry

a mate and i will be over there from the 6th of jan to the 27th of jan!

Tokyo Autosalon FTW!

who else will be over there... Wheezy, i think i;d like to hear more of your tips as this is my first time overseas and i feel it might be a bit of a shock when i get there.

I was there in oct last year... had a absolute ball...

Tokyo - It's pretty overwhelming at first, just try and fully immerse yourself in the culture of it.. I regret not doing that, the girl I went with was too scared do so and buggered up that part of the trip.

If you get the chance go to Kyoto there are soooo many beautiful temples there and maybe try and take a day trip to Nara, where the biggest wooden temple in the world is and HEAP of cute little deers who will turn nasty and ear your clothes once you run out of biscuits to give them.

Golden Pavillion is a must see. And you might spot a few geishas down the back streets of Kyoto if your lucky. There were plenty of other "ladies of the night" there done up to the max to entertain the business men.

I hardly saw any modified cars around, I got excited every time I did see a skyline.

If you go to Harajuku make sure you go on the weekends. Thats when all the Harajuku girls are out.

I didn't find the Japanese racist at all. Some got a little irritated trying to explain things to me because I couldn't understand but in general I found them most accommodating and patient. it pays to know a few Japanese words, especially "thank you" and "excuse me". I think I used those the most.

Otherwise just go with no expectations and it will totally blow your mind! and the girls over there are STUNNING and so fashionable.

Have a awesome time!

If you want to pick up some handy relevant Japanese easily try this -

http://www.earwormslearning.com/intro.html

http://www.earwormslearning.com/pdf/Booklet_Japanese.pdf

I've been using it and I find it works really well, I've remembered heaps of stuff and I'm pretty stupid :nyaanyaa:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
×
×
  • Create New...