Jump to content
SAU Community

What Boost Is R33 Ment To Sit At Idle

schnorky

By schnorky,
in Engines & Forced Induction

 Share

Recommended Posts

schnorky Proficient

schnorky

Posted
Posted

hey guys and gurls

jst recently put a gfb bov on the r33 but didnt like it to much so took it off

but noticed that my stock boost guage was at -7 at idle now i put my stock bov on

and it sits a bit before-7 :s

cars still runing fine jst like it was before

turbo still excatly the same

could of it thrown out the boost gauge some how?

cheers guys

mosquitocoils Veteran

mosquitocoils

Posted
Posted

It'll be fine, just remember that you altered a part of the system that's supposed to stay pressurised.

The stock blow off valve is designed to leak a little bit when at idle, so I would suggest that changing from the GFB one (which wouldn't leak at idle) to the stock one would change your reading.

schnorky Proficient

schnorky

Posted
  • Author
Posted

Cheers guys I was worried at first but the car is still

mechanicly sound , cheers guys I'll check the vac line tomorrow if I was to change my bov

would I need to get a tune or somthing coz I was looking to buy the greddy type s

l_uk3y Proficient

l_uk3y

Posted
Posted
Cheers guys I was worried at first but the car is still

mechanicly sound , cheers guys I'll check the vac line tomorrow if I was to change my bov

would I need to get a tune or somthing coz I was looking to buy the greddy type s

Dont bother getting a tune if your only changing a BOV. If it is Recirculating back into the intake then nothing changes. If it is atmospheric then a tune wont really help unless you find an alternative to the factory Air Sensor (And even then you would only have to worry about the possible stalling issues caused by Atmo BOV's as covered in many, many a post before this)

Save the tune for big mods like injectors, turbos etc.

Luke

BezerkR32 Veteran

BezerkR32

Posted
Posted

ahhh ok. im sure nissan would have designed a vacuum leak into the intake system to aid smooth idle lol.

It'll be fine, just remember that you altered a part of the system that's supposed to stay pressurised.

The stock blow off valve is designed to leak a little bit when at idle, so I would suggest that changing from the GFB one (which wouldn't leak at idle) to the stock one would change your reading.

MBS206 Grand Master

MBS206

Posted
Posted
Even if the BOV is designed to leak, it's a NOT going to affect idle as the "leak" is not escaping outside of the air measured by the AFM.

I don't see, how at idle, the stock BOV is going to be "leaking".

Air flows from point of highest pressure to lowest. When idling, the WHOLE intake up until the throttle body is at the same pressure...

The vacuum point is from the throttle body to motor side... Nothing to do with before it...

gotRICE? Veteran

gotRICE?

Posted
Posted
I don't see, how at idle, the stock BOV is going to be "leaking".

Air flows from point of highest pressure to lowest. When idling, the WHOLE intake up until the throttle body is at the same pressure...

The vacuum point is from the throttle body to motor side... Nothing to do with before it...

Maybe it leaks backwards :blink:

doo doo Proficient

doo doo

Posted
Posted
I don't see, how at idle, the stock BOV is going to be "leaking".

Air flows from point of highest pressure to lowest. When idling, the WHOLE intake up until the throttle body is at the same pressure...

The vacuum point is from the throttle body to motor side... Nothing to do with before it...

Except for the fact there's a vacuum line (from after the throttles) to the top of the bov which would suck it open unless the spring held it shut. the factory spring tension is soft enough to allow a small leak at idle.

MBS206 Grand Master

MBS206

Posted
Posted
Except for the fact there's a vacuum line (from after the throttles) to the top of the bov which would suck it open unless the spring held it shut. the factory spring tension is soft enough to allow a small leak at idle.

Even if the bov were fully opened, pressure on the air filter side, and the IC pipe side is EQUAL, so there is no "leak".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      It's been a little over a decade since I bought the S15. As I did on my socials, I'll share some of my favorite pictures from over the years further below. If you haven't realised, pretty much all the pictures in my posts are ones I've taken.  In terms of updates, I don't have pictures, but I acquired a near-perfect pair of fog lights from a friend of mine, so those got swapped in for the pair I already had. As for the JZX110, I just got it back from being fixed. A few weeks back, I was on the highway when I suddenly drove over something with very little time to react. It was probably the size of a soccer ball, but it went under the car and banged into the underside pretty loudly. I pulled over and realized the fluid leaking was fuel, and of course, it was right near my exhaust. This required replacing the fuel tank. If you happen to be in the same predicament, thankfully this car shares a fuel tank with the JZS171, IS200, and IS300, so it wasn't too painful to replace. Enjoy some pictures as mentioned above, including the carnage from the fuel tank and a bonus picture I came across which shows how ridiculously shiny the Bugels are on the 110. So many more pictures I could share of the S15 but this will do for today, enjoy. 
    • luke gtr
      Howdy from the states.

      By luke gtr · Posted

      Welcome.  Was the mistake the car, or joining us? 😏
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeap, was me and the daughter getting coffee before heading to the new joint to measure up the fridge space and taking some pics that the solar installer wanted of the switch board
    • Duncan
      NC MX5

      By Duncan · Posted

      I saw a car just like this stopping at Harvest for coffee this morning
    • stewart1
      Random Parts I've Recently Replaced

      By stewart1 · Posted

      Factory Dash Lamps...Half the speedo was dark...T10 3 Watt Park Lamps...T10 5 Watt Tachometer Chip/IC...Tach would randomly go crazy or stop, replacing  capacitors and re-soldering the chip would work for a week or so but it would always fail again...AN8352UBK (Buy on ebay AU) Heater/Air Con Control Button Lamps...Grain of Wheat Bulb 12V...Tried LED's they fail after a month or so(even with current limiting resistors)
×
×
  • Create New...