Jump to content
SAU Community

Recommended Posts

For $3k you can buy genuine & new - import them but be prepared to wait a while to receive them.

RAYS Engineering advertises an 18x7.5 TE37 on their web site for ¥81900 each, which is around AUD$1000 a rim with the current exchange rate.

If you can land them in Australia for AUD$1K under their home-country RRP (I'll assume you're planning on dodging Customs Duty and GST) I'd love to find out where from.

thanks guys for the info, it really helped

god theres some porn-O-grapic rims out there! offt!

im gonna look around for some second hand jap rims as mentioned, thats a good idea!

i was only gonna put 18s on cos i thought it would look good,

but if 17's are better, then ill go 17's - it doesnt faise me

i just want phat offset and rims in the rear

i keep leaning towards the shadow alloy and dark bronze, they are hot!!! but the theme on my car is black on black on black

hard decision!!!

I know some people hate cheap-brand wheels, but the two shortlisted wheels for my SW20 (if I bought new) were:

Koya Drifteks

Lenso D1Rs.

You already know what the Drifteks look like. The D1Rs look like this:

d1rr33.jpg

DSC01397.jpg

They should give you a pretty nice amount of dish (the spoke does curve in near the barrel) and if you're willing to run camber, streched tyres and massaged guards they do come in GT-R offsets.

Even without, cars with as shitty offsets as S2000s can get good dish:

138220_2009081416.jpg

Edited by scathing

Yeah, your definately better off with 17"s, to many people go large diameter rims just for the hell of it, and they actually perform worse.

You need a certain amount of rubber, running on rubber bands just doesn't perform well at all.

woah..could not believe that you said you wanna spend 2-3k on wheels and u wanted bsa te37 copies? also the lack of jap rim recommendations lol. just doesn't sound right?

u could buy 18x10 +18 xd9's and powder coat them black for about 2500?

http://cgi.ebay.com.au/WORK-WHEELS-XD9-SKY...=item439b925592

or cr kais for abit less.

http://cgi.ebay.com.au/WORK-WHEELS-CR-KAI-...=item45ef85c603

or else check import monsters stock and j imports for sure with jap rims.

RAYS Engineering advertises an 18x7.5 TE37 on their web site for ¥81900 each, which is around AUD$1000 a rim with the current exchange rate.

If you can land them in Australia for AUD$1K under their home-country RRP (I'll assume you're planning on dodging Customs Duty and GST) I'd love to find out where from.

Your price of $1k may be a little high as even the obvious importer lists them at a discount to that figure.

But you are right in that $3k for an TE37 in 18" is a non starter given the current exchange rate. Other of the Volk rims are doable within that budget.

I would be happier paying a bit more than that for the real thing than paying for a knock off.

at first, i was looking at getting the xd9 18 x 10 in matte bronze but the 10' wide wouldnt fit on the rear ( as it is a GTST with GTR front guards) without alot of guard mod, adjustable camber arms and better coils

and i didnt want the 18 x 9 because i wanted the dish of the 18 x 10.

and i was also looking at the BSA replica TE37s only because i never thought id actually come into reach of a genuine set of ray te37s.

Check out these wheels Work XD9 madbray (MBG) These are the latest finish to just come out !post-68456-1260257006_thumb.jpgpost-68456-1260257039_thumb.jpg

That is Colin's. Look really good in real life too.

Shiv: You might wanna check if your car will fit those offsets. Numbers look like a GTR offset to me. If so, you'll need to roll some guards or do something to make them fit.

Your price of $1k may be a little high as even the obvious importer lists them at a discount to that figure.

True, but that's offset by the fact that importers have to pay to ship them from Japan whereas the local retailers would not.

But you are right in that $3k for an TE37 in 18" is a non starter given the current exchange rate

I paid around $4K for mine about 2 years ago. It was before the bubble burst.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...