Jump to content
SAU Community

Recommended Posts

Hey guys,

Now I've heard previously there was a fair bit of interest in people getting c/f door cards when I last posted about them.

Have spoken to Shane at PSI Parts and he would be able to get these made, we'd just need to get 10 people down to get these to make it feasible.

Price would be $600 for the pair, don't try and tell me thats not a bargain as F1 in the UK are selling them for 700 pounds.

Please post your interest below

Cheers

Accessories are not included on the door cards

post-59566-1259892451_thumb.jpg

Not sure if we could get the GTS/T/R written on like this will have to confirm

post-59566-1259892462_thumb.jpg

Fitted:

post-59566-1259892471_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/298898-carbon-fibre-door-cards/
Share on other sites

It's only going to be for 33's atm, depending on the success of this they may start to provide for 32's and 34's, unsure

As I know alot of people are after them, cause generally they are only made for silvias and 180s at most places from what I know so far.

Only door inserts atm, I know the c/f doors can be purchased in Aus, but not the door cards though.

The GTR wont be on these doors, its just an example as Knight Racer in UK do have it on theirs.

I can definately say the c/f is top quality, have had my bonnet, duckwing and diffuser all from them, PM-R33 also has gear from there so will be able to agree as will anyone else who has purchased from PSI Parts.

I dont personally know F1s gear so wouldnt be able to compare it.

I can get you photos of the weave on my gear if you want to check it out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...