Jump to content
SAU Community

Recommended Posts

Hey guys,

Now I've heard previously there was a fair bit of interest in people getting c/f door cards when I last posted about them.

Have spoken to Shane at PSI Parts and he would be able to get these made, we'd just need to get 10 people down to get these to make it feasible.

Price would be $600 for the pair, don't try and tell me thats not a bargain as F1 in the UK are selling them for 700 pounds.

Please post your interest below

Cheers

Accessories are not included on the door cards

post-59566-1259892451_thumb.jpg

Not sure if we could get the GTS/T/R written on like this will have to confirm

post-59566-1259892462_thumb.jpg

Fitted:

post-59566-1259892471_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/298898-carbon-fibre-door-cards/
Share on other sites

It's only going to be for 33's atm, depending on the success of this they may start to provide for 32's and 34's, unsure

As I know alot of people are after them, cause generally they are only made for silvias and 180s at most places from what I know so far.

Only door inserts atm, I know the c/f doors can be purchased in Aus, but not the door cards though.

The GTR wont be on these doors, its just an example as Knight Racer in UK do have it on theirs.

I can definately say the c/f is top quality, have had my bonnet, duckwing and diffuser all from them, PM-R33 also has gear from there so will be able to agree as will anyone else who has purchased from PSI Parts.

I dont personally know F1s gear so wouldnt be able to compare it.

I can get you photos of the weave on my gear if you want to check it out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
    • Fuark, at least the motor survived. What brand was the fitting that snapped?
    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
×
×
  • Create New...