Jump to content
SAU Community

Recommended Posts

This could be good. I had an RMR30 that I must confess I neglected and the Auto conked out at 600. Of course it was only an L24E. But at least the auto matched the engine. I am hoping the S1 will give, say, 75%. I would be happy as a cop in shit.

I am looking at some mods to prolong The S1 life.

Edited by 66yostagea

Not exactly the same, I know, but my r31 (rb30e) had done over 500,000 kays when I sold it, 300,000 of that in my hands, never used oil, never missed a beat except corroded plug on CAS, ($20 fix).

RB's are built with extremely accurate tolerances. Also the crank girdle gives a very stiff block structure which can only help as power increases. As such, moderately powered examples that are not revved constantly within an inch of their lives are a very long lived proposition.

A C34 will rust doors away before the drive line gives out. My parents' VL clocked up ~430k before it got written off, my Stag is at 120k and I expect another 200k out of it before I think about rebuilding the motor. The turbocharger should last just as long if it's given clean air and clean oil. My L28ET is at about 300K and is being retired in the quest for more HP, not because it's stuffed...

Mine was in excellent condition at 134,000 k's... then I put some coarse grit blasting compound in the oil and drove it for a couple of thousand and it was *still* going strong. Decided to rebuild to be safe :D

Mine has 138,000 and i bought it to years ago and it had 60,000. Ive started towing a trailer with about a tonne of weight everyday about 7months ago and it tows well. never cost me any serious money yet. Service every 5000km, although my realese bearing is realy noisy ive never had any dramas "touch wood". Thats just routine maintenence.

I know its not a 25 but... I have witnessed a RB30ET (Factory Turbo VL not a +T)

on the dyno with a genuine 600,000 + Kms on the clock.

Only on the dyno to check everything still looking healthy.

The owner had only replaced the injectors and AFM in its time,

with general maintenance of course.

Aren't turbos a maintenance item at 100k km?

Also, we need to remember that some members cars km's won't be genuine...

IMO, 'Factory' Turbos are abit of a 'luck of the draw'. Ive heard of RB turbos letting go (seals, wheels etc) at a

very early age/Milage and others doing 200k + km's.

The MOST common problem I've come across with mine and several other friends turbos, are the

'Manifold to Turbo' gasket. Generally its just the Nuts coming loose and just need a nip up. The 'Turbo tabs'

do a mighty good job at preventing any further implications. When the nuts loosen, a strange 'whistle/whine'

can be heard very clearly when under full song. My conclusion on the problem is poor maintenance regarding

the exhaust mounts/design etc. Just swinging around hanging all its weight on the back of the turbo can

be harmful.

Regarding the 'Genuine' KM's... I got mine a month after coming off the docks with 48,***kms. I wouldnt

be suprised in the slightest if they were wound back or tampered with in some way. Abit too good/unbelievable to be true... ;)

Aren't turbos a maintenance item at 100k km?

Also, we need to remember that some members cars km's won't be genuine...

This is true for the M35 but not sure about the C34. The M35's have a similar turbo but run slightly higher boost (11.7psi for RS/RX and 15? for ARX) so presumably this would have an effect on the lifespan of the turbo.

Mine has now done nearly 110,000 and the turbo still appears to be going strong (completely stock). Fingers crossed.

So far the only actual diagnosed "fault" has been the throttle body getting clogged up making the butterfly a bit sticky - which caused it to stall occasionally. I cleaned it out myself, carried out the idle-relearn procedure (see the DIY/howto thread at the top of the stagea section) and it was all fixed.

Total Cost: $0

The kms on my M35 stagea are more than likely genuine since I imported it through someone I know and trust, and who has been dealing with the same agents in japan for years.

My last stagea was a series 2 which I bought from a dealer on the Gold Coast. 28000kms for a 1999 model seemed a bit too far fetched - however it did go all the way to 100,000km without the timing belt breaking so either they changed it before I got it, or it had really done somewhere around 128,000km. Interior condition was very good - however there was a slight oil leak from the rocker cover.... That stagea proved to be pretty reliable although it did have a cracked exhaust manifold and suspect turbo, both which needed replacing. One of the shock absorbers also needed replacing - which was done under dealer warranty. Other than these initial problems (which existed when I bought the car), I really had no major issues at all in the 2 years I owned the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hot tip, stop picking at shit. Live in bliss instead   From my recent experience in rust repairs, white it may seem to not go much further back, you'll still need to cut back a bit further.  From what I can see there, the outer skin, and the inner is rusted too. From what I can see you've got the inner one which is all structural, and window likely affixes too.   If tag Murray Calavera here, but my phone won't let me tag him, he'd probably be able to give the best advise.   I do know, welding roof panels is a right pain in the bollocks! Very heavy to heat distort the roof and warp it all.
    • Some of the filler.   Also if I look under the top flap of metal it starts looking good quite close to the edge. I get the feeling it doesn't go much further.
    • So, I finally started digging at the bit of my roof that was cracking and bulging a bit. Well, it was just thick filler that was covering some pretty bad rust. I didn't find the edges, I was too bummed to keep going.  There are a few holes as you can see. There was just so much filler but looks like no attempt under the filler to prime or use rust converter, just slapped filler on exposed rust.  Anyway, I'm going to take the windshield out and find the edges. I'd love to fix this myself as I'm pretty sure it'll be expensive to get done properly. I was thinking I could just get a cut piece from another E39 and just weld it in place as it would be the right size and shape.  Thoughts?
    • This is the territory of the "Stage 1/2/3 Golf GTI/R" or otherwise off the shelf tune with (relative to before) minor mods. It's easier now. Downpipe and Tune and boom, big increases. Stage 1 OEM+ is where it's at. This is where the niche evolved into and it's really easy to see why. It's rare to even NEED to consider changing turbos or going to aftermarket ECU's or building bottom ends for more power. Stage 1-2-3 will get you a LONG WAY. Civic Type R turbo GR Yaris/Corolla Anything with B58 (MKV Supra/x40i) Anything BMW in General Anything Audi in General Any turbo AMG RenaultSport Turbo offerings Korean Elantra N/I30N Ecoboost Mustangs Focus RS? List goes on. I would argue in the future it won't even need to go on... M3P is pretty rapid out of the box...
    • There is a way, but it's not with the same cars. You need to find the same vintage of car, that we had. Realistically, that was an affordable car with aftermarket parts around. So what people need to find is a car that had a decent base in its day, and can be modified. They're looking for a car year make of 2010 to 2015 really... Aus could have done it if Holden didn't fold as V8 commodores were cheap, and if Ford didn't get expensive thanks to COVID, then you could cheaply play with FG Barras. Realistically, those are just a bit heavier, four door skylines. I'm sure the US and UK have similar cars they could find.
×
×
  • Create New...