Jump to content
SAU Community

Problem With Fuel And Tempurature Gauge

tonich

By tonich,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

tonich Contributor

tonich

Posted
Posted

hi all

I recently bought a 04 white v35, found problem with fuel gauge. I filled up the tank the needle only display 3/4 full and fuel light alway on. the tempurature guage / needle does not move at all. took the car dealer as still until warranty. they used a scanner and says fuel system and temperature is running normal. it just doesnt display correctly and need calibration.

it is schdule to be fixed in jan next month

is it big problem? any one have similar problem? how can this happen?

apart from these, the car runs fine and speedo is correcy

I hope these are small problem and hope to resolve asap so i can enjoy the ride.

Yi-Town Contributor

Yi-Town

Posted
Posted
hi all

I recently bought a 04 white v35, found problem with fuel gauge. I filled up the tank the needle only display 3/4 full and fuel light alway on. the tempurature guage / needle does not move at all. took the car dealer as still until warranty. they used a scanner and says fuel system and temperature is running normal. it just doesnt display correctly and need calibration.

it is schdule to be fixed in jan next month

is it big problem? any one have similar problem? how can this happen?

apart from these, the car runs fine and speedo is correcy

I hope these are small problem and hope to resolve asap so i can enjoy the ride.

Hi Mate,

I have just bought a new 04 white V35 coupe and I am also facing the exact same problem. Fillled up the whole tank and needle only went to 3/4 full. My needle moves but tends to be quite inaccurate. My light is fine though. Did you happen to get this fixed?

Thanks.

The Max Mentor

The Max

Posted
Posted (edited)
I have just bought a new 04 white V35 coupe and I am also facing the exact same problem. Fillled up the whole tank and needle only went to 3/4 full. My needle moves but tends to be quite inaccurate. My light is fine though. Did you happen to get this fixed?

I had the same problem with my 92 Maxima. I'd like to blame it on a dirty resistive track on the fuel sender in the tank but with all the fuel sloshing around, that should keep it clean. I ended up fixing mine myself by painting a thin film of conductive carbon ink on the worn pads but this stuff isn't cheap to come by (about $200 a bottle) but I use it for a number of other applications in my line of work so that was my justification for it.

I'm not sure if you can just get that as a replacement part. I do remember asking around for my own reference including my favourite Nissan dealership but I can't remember if I had to get the whole assembly (minus the pump) or not.

Edited by The Max
johnr Enthusiast

johnr

Posted
Posted
Where did you guys get your car from?

My fuel gauge is the same. I fill up and only 35 litres can go in and the gauge fluctuates from full to three quarters full so at half full the gauge shows empty and the empty light comes on. Any clues????

ther Enthusiast

ther

Posted
Posted (edited)
My fuel gauge is the same. I fill up and only 35 litres can go in and the gauge fluctuates from full to three quarters full so at half full the gauge shows empty and the empty light comes on. Any clues????

It is usually the fuel sensor, know fault check the US g35 sites for more detail.

With the needle on the temp you can do some checking yourself. get the servicing manual and they have a sequence you need to do with the ignition and the pedals to enter into diagnostic modes to test the dash. This will tell you if there is an actual problem with the needles or the dash.

Edited by ther
  • 3 months later...
whtbox Community Regular

whtbox

Posted
Posted

any one got this fuel gauge issue fixed up yet?

If not, i heard there is a DIY by cleaning the Fuel sensor unit with Q-tip fix the problem.

http://g35driver.com/forums/g-spot/243942-...eirdness-6.html

tonich Contributor

tonich

Posted
  • Author
Posted

pw350gt, do you think i can get a mechanic to do this for me. I am not confidence doing this Diy. how long did it took you"?

Ok I can Confirm now that cleaning the Fuel Sensor with Q-tip is working. First my fuel gauge only shown 3/4 full when filled up to the max. Now it's all fix now.
whtbox Community Regular

whtbox

Posted
Posted

I think your Mechanic should take that long to do it for you. It took me an hour because i spilled the Fuel onto the Rubber O-ring and it expanded. TOOK me heck a long time and frustration to put it back. As long there isn't a problem with O-ring, i don't think it'll take that long at all probably 30 Min.

I Suggest leave the Fuel at about 1/4 full to be on safe side. If you are not confident just show your Mechanic the steps how to do it.

Good luck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...