Jump to content
SAU Community

Recommended Posts

for a dyson. if you dont wana spend too much, dont have asthma and dont need to worry about space then the dc19Y. if you wana pick up pet hair then chuck on a turbo head with this and your set.

if you want something better, want cleaner air and want it to come with a turbine head (a must for pet hair on carpet then get the DC23 turbine head. few extra little features + its a newer model so a bit different but better design.

if you want a upright then the dc25 (i think) is good...light, easy to push around + a power head........plus its purple.

bit hard to explain when im not in the shop...but they are the three i would go for.

Edited by Gus-
Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/538/#findComment-4405802
Share on other sites

well if you have asthma/hayfever/allergys then its reccommended to get one with a hepa filter. its a really fine filter after the motor (like a cat in a car) that filters out all the microscopic dust + dust mites etc etc. makes the air about 150X cleaner than normal air you breathe.

and pet hair you want a turbine head...so id say either the dc19turbine (blue) or the dc23 turbine (bronze)

or if you want a upright dc25 (purple).

look on theDYSON WEBSITE and let me know if you have any questions.

and remember...cost price :banana:

Edited by Gus-
Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/538/#findComment-4405906
Share on other sites

myer ticket at retail from what i gather dont discount...and dyson markup is huge so id say youd be looking at least $150 off if not more (average person would get about 10% off). dyson models go up from 599 to 1099 (retail) but im sure the model for 799 is the dc19 turbine.

Edited by Gus-
Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/538/#findComment-4405964
Share on other sites

we do interest free through ge money same as hn.

so if u dont buy off me...im never talking to you again. ever

EVER? *cries* :D

so I could use my GE card that I got at HN and not have to go thru heaps of paperwork and stuffs?

Pete! How? Mum and dads old one? :(

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/538/#findComment-4406174
Share on other sites

I have a DC08, got it when I moved into my new place.. It's just the base model but I love it. I seriously never thought it was worth while getting such an expensive vacuum but it's really worth it. It just gets so much dust!

haha I saw your dyson, remember? i think it's the only time i've ever commented on someones vaccum "oh hey! you've got a dyson!" lol

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/538/#findComment-4406180
Share on other sites

Hey, I just recently got a DC23 Dyson aswell with the motorrized head, 10% off at myers and another 10% off since the misses works there, haven't given it a go yet.

also spotted white R32 GTR with R33 GTR rims parked at home I think, anyone here?

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/538/#findComment-4406186
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...