Jump to content
SAU Community

Recommended Posts

hey guys was refereed to this part of the forums for my inquiry

original thread: http://www.skylinesaustralia.com/forums/Bu...se-t302945.html

basically looking to buy a 1993 model r33 skyline turbo, looking to take out the turbo so its p plate legal in VIC

heard stuff like the car not running without the turbo blah blah, just wanna clear things up

oh and was wondering if this is possible and how much will it cost all up if i could do it?

thanks again guys!

Link to comment
https://www.sau.com.au/forums/topic/303174-r33-1993-remove-turbo-help/
Share on other sites

mate i personally wouldnt... i have heard on here that the car will be massively underpowered... gotta change alot of things aswell

if you want specifics.. read this whole thread mate:

http://www.skylinesaustralia.com/forums/Co...-N-t116272.html

cheers

"u cud swap with na pistons to bring the compression back up, whack a na chipped ecu or a gts link ecu in her, and replace manifold with extractors. or instead of pistons - maybe a really really thin head gasket, deck the block or the head a tiny bit.

injectors should be fine with a chipped/aftermarket ecu and obviously you would need a retune

car will drive like a total slug without the re-tuning otherwise.

its alot of work - an RB25DE would be a cheaper option to whack in her, or RB30DE but since u said ur p plate.. im not sure i dont think u cud do that man

if you went down that road of getting an RB25DE in her.. you would also have the added bonus of the bigger turbo brakes that people long for :happy:"

^^^ pretty much a quote from that above thread...

Edited by noely1

One image to sum this topic up

post_a261788_DSCF0023.jpg

So its definately possible. But the results are "epic fail".

If you need a Skyline. Get yourself a Non turbo 33 or 34, Get some coilovers, sway bars and a quality catback exhaust. Then save like mad to buy yourself a GTR for your 21st Birthday.

My 2c.

Luke

As said above.

BIBLICAL fail.

Your spending more money than the price of an NA buying a turbo. Spending more money to to remove the turbo. Results are worse performance than an NA at almost twice the cost.

Buy an NA and sell later/turbo later/buy a 34 NA

hey guys was refereed to this part of the forums for my inquiry

original thread: http://www.skylinesaustralia.com/forums/Bu...se-t302945.html

basically looking to buy a 1993 model r33 skyline turbo, looking to take out the turbo so its p plate legal in VIC

heard stuff like the car not running without the turbo blah blah, just wanna clear things up

oh and was wondering if this is possible and how much will it cost all up if i could do it?

thanks again guys!

I was just reading in HPI magazine somewhere, that even if you remove the turbo the car is still essentially registered as a turbo car because of its make...so technically still illegal...

Sounds weird i know...but just check b4 you dive into it....personally id get the 34 :)

Edited by faggywaggy

haah u can buy my 34 if u want :D i gotta part ways with it :/

but yeah man... turbo'd r33's are going for cheap these days.. cause the n/a versions are more expensive as the P Platers are getting into them... so if possible keep teh turbo til ur off ur p's or something and save up and get a nice N/A 34 or whatever u like..

if not then depending wat mods u have.... u might i have my doubts... just be able to get a r34 n/a if ur lucky with the money u sold ur gtst for bro.. something to think about i spose

Edited by noely1

" don't bother with an N/A Skyline, it's like buying a 4 cyl Commodore "

only alot sexier... plus some N/A skylines beat stock GTST's?? My friends R33 N/A beats GTST's on the rare occasion.. they're usually stuffed or completley stock.. still an achievement... runs early 15's to mid 15's respect for the non turbo's lol :D

commodores would run 16-17's wouldnt they? not sure..

i said my friend... not myself...

hmmm doesnt matter if they're shit drivers or the cars are stuffed... still an n/a is beating them... and yeah a VN does beat a n/a not by much?? big 3.8ltr vs 2.5ltr they put up a big fight...

we all start somewhere... im suree if he could he would drive a turbo no doubt, as would i.. gotta pay respect when its due dude

Edited by noely1
I was just reading in HPI magazine somewhere, that even if you remove the turbo the car is still essentially registered as a turbo car because of its make...so technically still illegal...

Yep that is exactly right. This is the one thing most of these young guys don't understand when talking about "taking a turbo off". This does not make the car legal. The car is complianced and registered as a turbo car therefore it is irrelevant if you take the turbo off, still illegal to drive. (might sound a bit stupid but thats the case).

The only way i can think of making it legal (at least in QLD) is going to an engineer, getting it mod plated for not having a turbo, then re registering it as a non turbo. This still might not be legal i dunno. But if it was it would be the only way to do it and really if your going to all that effort, for f**ks sake just buy a non turbo GTS.

" don't bother with an N/A Skyline, it's like buying a 4 cyl Commodore "

only alot sexier... plus some N/A skylines beat stock GTST's?? My friends R33 N/A beats GTST's on the rare occasion.. they're usually stuffed or completley stock.. still an achievement... runs early 15's to mid 15's respect for the non turbo's lol :(

commodores would run 16-17's wouldnt they? not sure..

mid to low 15's is that all? my old v6 magna with just a cat back exhaust ran high 14's and it's a fwd family car, LOL

and the only reason a 2.5L skyline can keep up with a commodore or a falcon is because of the gear ratios. give them the same gear ratios and the commodore and falcons would kick the arse of a NA skyline and probably even give a mild turbo skyline a run for it's money.

yea, please listen to other posts mate, either just get a na wether it be 32,33,34 and save ur coin till ur 21st bday n get a gtr, once u get a gtst, u want a gtr so just get one of them straight up. :P

go with a 5 speed vs commy or somethin and just save ur coin n enjoy thrashin the commywhore around then get a vspec :OOOO make the panties drop then.

In sydney, aslong as the car isn't turbocharged its legal. Doesn't matter what its registered as, my mate went through the same process and he wasn't hassled for it....still registered as a GTS25t.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...