Jump to content
SAU Community

Recommended Posts

hey guys i wanna try build my first computer and i want to make it an elite gaming machine all i need is just a set up if yous could help me with eg. a list of awsome parts that are gunna be compatible..im bit behind with the latest gaming parts thanks.

Link to comment
https://www.sau.com.au/forums/topic/303876-building-a-elite-gaming-machine/
Share on other sites

this thread is going to go for a while. Also have a look at some of the PC build threads in here for some good advice and some builds that are prob what you are after.

Some good online stores already have decent PC's made at a good price

www.netplus.com.au

www.scorptec.com.au (i have not used em so not sure)

www.ple.com.au

www.pccasegear.com.au (not pre built systems but if you want to make one my purchases from there have always resulted in me being a very happy customer)

i7 920 D0 stepping - $350

GA-EX58-UD3R - $250

Corsair HX750 - $250

ATi 5870 - $500

G.Skill or Kingston DDR3 PC16000 - $250

Lian Li Armorsuit PC-P50 - $250

Prolimatech Megahalems Rev. B - $90 (you'll need a fan as well $20, Scythe Slipstream 1900)

~$1950

With that setup, overclocked , would be the current PC to put together if i were to build a solid gaming box that won't need upgrading within the next 2 years.

Games will run on full settings, full AA, the works. So the will look as good as they can :blink:

Honestly id say get a 24", BenQ ones are like $200-$220.

ok thanks for that ash, where do u buy your parts from? aparently theres a really cheap place in boxhill just behind carrington st. are benq monitors any good? i was thinking mayb a samsung or hp

and 25Gtt im not after a already built pc, i wanna build my own...just as a project..just so i can learn.

www.staticice.com.au

Check pricing there, go to whoever is cheapest.

But also send places a full list and see if they will discount for you, you never know, which would save you going to 4 different once.

PCCG & MSY usually don't discount, but then generally they are the cheapest from what i've found.

Centrecom & Scorptec's pricing is higher than MSY/PCCG usually.

Nothing wrong with BenQ - im using a 24" one happily for over 12 months now.

The other monitors are just overpriced. At the end of the day they are all a "TN" panel, so $240 is all you should spend as there are always monitors "on special"

Unless you are going a IPS/S-IPS panel but then for a 24" you are looking @ $800. If you aren't doing graphic design, where colours are SUPER important, they aren't worth the coin :D

Personally, i'd be snapping this up while it's on sale :blink:

http://www.pccasegear.com/index.php?main_p...oducts_id=12310

You can't seem to get 24" in 16:10 (better for gaming) anymore, i think i got the last of the 16:10 24" ones on the market - but still 16:9 is perfectly fine

I have a Samsung 2443BW which is 16:10 and is still listed on PCCG, but they are phasing out.

ATi 5870 - $500

Honestly id say get a 24", BenQ ones are like $200-$220.

Yeah, if going single screen a 24" or 1920x1200 (/1080) res should be your minimum for that GPU. Otherwise the ATi HD5850 will more than suffice.

^ Ah, true that. But double the price of the BenQ - but nowhere near double the quality!

I also agree, it'll be 1900/1200(1080) @ a min, depending on monitor choice that might be the highest res.

Even a 5850 would perform very nicely on such a monitor, guess depends if you want upgrade again in 12 months or not.

If the budget is tight and you want to save $120 then a 5850 would without a doubt still perform excellent for the task at hand.

GPU's are a long way ahead of games at present so there is some nice headroom with most new fab cards.

I'd go R31Nismoid's deal of box, that's dirt cheap for what it is.

I just bought a dual core 2.93 (E7500) with 4 g of ram, 9800GT video card, 1tb hdd etc for about $700, and it seems to play my games quite nicely. I usually buy one of something like this per year, and retire the older box as some form of movie server, web server, etc.

  • 2 weeks later...
PCCG & MSY usually don't discount, but then generally they are the cheapest from what i've found.

Centrecom & Scorptec's pricing is higher than MSY/PCCG usually.

That said i have often found centrecom will match msy prices at the counter if you ask...Which is handy for me cause centrecom is close msy is a drive :D

^^ A PC for the fool :)

Over spec'd parts, that offer no better performance than cheaper ones... he who pays for that, be a sucker!

That said i have often found centrecom will match msy prices at the counter if you ask...Which is handy for me cause centrecom is close msy is a drive :thumbsup:

Ye they usually match, friend of mine goes there and always gets matched.

Comes down to who is closer :D

  • 2 weeks later...

whirpool.net has alot of pc configuration and they usually update it to budget and what you will do with it.

but when you buy your lcd make sure it fits your table. i had to use a different table because my old one broke. and i have a 24 inch and it too big for this smaller table so it has to sit kind of sidways to fit on the table.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...