Jump to content
SAU Community

Recommended Posts

chasing a turbo for my 25...

looking for good response and around the 250ish mark.

have searched and read up... for 2 days and looking into HighFlowed 33 turbo, Garrett 2860Rs-10, or 2871.

curious on other people opinions but am really trying to keep full boost below 3200.. from what i have read the 30 series are a lil too laggy for my liking.. bear in mind i am chasing response and not huge power.

car will be running power fc, z32AFM, bosch 040 pump, straight 3inch pipes, 2way 4.1 ratio.

whats around??

Link to comment
https://www.sau.com.au/forums/topic/304539-turbo-opinions/
Share on other sites

there is no link, im saying your lieing and have not read :) *read have not read enough*

READEDREADDEREDAED

the dyno results thread had everything you want to know, there is also the GT30 thread which will cover alot of the information you want about things that are smaller and cheaper (especially later) the 2871 Rb25 thread is also good as is the hypergear hiflow service thread.

start reading you could cover it all in a couple of hours, and I guarantee you will find people with results equal to what your asking, 250kw and 3200rpm spool

Link to comment
https://www.sau.com.au/forums/topic/304539-turbo-opinions/#findComment-5042908
Share on other sites

garrett 3071R? i'm looking for similar power but without having to run the turbo at 18 odd PSI, which kind of limits it to a 3076R with a .63 rear. No offence to Hypergear but I don't really want to set myself up for disappointment with a cheap turbo again

Link to comment
https://www.sau.com.au/forums/topic/304539-turbo-opinions/#findComment-5042947
Share on other sites

link didnt work scott.

GTRS is $4500 new....

Garrett turbos are under $2000 new so mildly different in price.

been looking at GCG vs Hypergear turbos... opinions?

they aren't $4500 new. $2800 from nengun.....which is expensive compared to a quality hi-flow but certainly isn't $4500.

Link to comment
https://www.sau.com.au/forums/topic/304539-turbo-opinions/#findComment-5043172
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...