Jump to content
SAU Community

Recommended Posts

Hi all,

Just wondering how many kilometers some skylines have done out there, and what problems they have run into due to age and fatigue. Would be interesting to know how many 100,000 ks we can expect before any major dramas.

I would have liked to set this up as a poll but not sure how to.

Mine has done 75,000kms with no engine troubles so far.

Link to comment
https://www.sau.com.au/forums/topic/30472-how-many-kms-has-your-car-done/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

i think this will be impossible to answer due to them being wound back. I wouldnt base the condition of the engine based on kms. It depends on how much its been thrashed and treated. A well maintated rb will last forever

I am pretty sure not all skylines are wound back. I know when I bought mine i had it inspected and the mechanic said the wear and tear on the car matches the kms.

Even if u do look after the engine it is inevitable that someday something mechanical will fail. I am just curious if this has happened to anyone yet due to old age and not from being thrashed. Or will we have to wait another 5-10 years before we start seeing these problems.

Is there anyone who is into several 100,000 kms yet?

I got my R33 at 123,000k's...have gone up to 151,500k's since...still sounds beautiful I must say. But I do watch what oil goes in and put those long life additives and such, just to make sure.

I guess the only thing is that the engine oil probably doesn't usually last 5000kms like it should...may get black a bit earlier, like 4000kms

My 25T has just clicked up 118K. My R32 gtst before that got to 125k before I traded it, still going at 150k according to the current owner. My sisters Rb20e Cefero is now up to 220k and still going strong, starts first time every time and runs smooth as when she got it at 70K.

G

Bought my '95 GTS-T with 54,000km on the clock, i've now got 83,000km on the clock and all i've replaced is the clutch and rear shocks. Apart from that it hasn't missed a single beat, never stalled or anything... superb !

1992 R32 GTR, genuine 71000km's on it, only problem has been a snapped valve guide... it happened quite some time ago (the piece that came off went into a cylinder, scored the top of a piston, and you could tell it was quite old from the carbon buildup on it) but the car was still going happily. Got it fixed when I decided to rebuild the engine.

I think I've been living in Japan too long - I thought my old GTS was well passed it's best when I sold it with 91,000KM on the clock...that's Japanese thinking for you. There was nothing wrong with the car either. Never missed a beat. Trouble is over here, once you start getting close to the 100K mark car lose all re-sale value...:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...