Jump to content
SAU Community

Recommended Posts

hi all,

i have just bought myself my first skyline it is a r34 25GT 4 door with an rb25de neo engine and i was just wondering what would be the best cheap and easy modifications to make to get a bit better power and performance out of it? and how to get better handeling and cornering?

cheers Curtis

Link to comment
https://www.sau.com.au/forums/topic/305272-what-modifications-to-do/
Share on other sites

read around in the N/A section, these things have been covered many times.

in a nutshell

-2.5" exhaust

- high flow panel air filter

- 98 octane fuel

- make your car lighter

unless you want to go crazy and spend big money on an NA car. The return on performance parts on NA cars is little.

question 1: are you on your p's and therefore have power restrictions?

if yes, see above. if no, you bought the wrong car to make power from. sell it and buy a turbo version

that is all.

oh and for the handling side of things, get a set of coil overs

question 1: are you on your p's and therefore have power restrictions?

if yes, see above. if no, you bought the wrong car to make power from. sell it and buy a turbo version

that is all.

oh and for the handling side of things, get a set of coil overs

yeah im on p's but live in tassie so it doesn't matter if i have a turbo, its just insurance cost a bomb with a turbo.

and thanks for the advice it is much appreciated

Get a DECENT set of coilovers,you'll be surprised how much of a difference they will make to the overall handling to your car.

As suggested, an LSD is a good option. You'll have to buy an R33 LSD. You can also put R33 GTS25t brakes on aswell.

A decent set of tyres with wider rims will make your car handle nicer too.

I know the GT-V does

yeah, you'd think the four wheel drive does too?? does the GT V have a "SLIP" light?

im asking cos im trying to decide if i can use LSD diff oil when i change the oil, ive posted in the drivetrain section but not much luck there either

if i jacked the car up and turned the wheels... wouldnt an LSD make the wheels turn together and in the same direction??

ive had my GT FOUR fully stuck in the mud once before cos i was parked on the grass on a wee hill and it rained all night, lol, when i was trying to get it out all FOUR wheels were turning together....as if it were LSD

what you guys think?

sometimes a car with an open diff can still spin all the drive wheels. i know my falcon used to at times. other times it would only do 1 wheel. if there is little tracion (like in mud, etc) then it is easy for there to be enough friction in the diff to spin all the wheels. had 1 side been on something with more grip and the other in mud and they had all spun/driven then you would know for sure that it had a LSD. also as an open diff starts to wear out it can often start to spin both wheels more.

No point having extra power when the car handles like shit... Coilovers are a great start, swaybars and strut braces would make a load of difference. Then if any bushes look old or are getting worn then replace them and the car will handle 10x better!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...