Jump to content
SAU Community

Coil Pack Testers

Evil34

By Evil34,
in South Australia

 Share

Recommended Posts

Dohmar Grand Master

Dohmar

Posted
Posted
Does anyone know a place that can test coil packs to make sure they are working properly!!!!

I am trying to rule one thing out at a time at the moment to find what is wrong with my car!!!

connect an earth lead and a positive to the coilpack top, then put the live bit of the coilpack on your tongue

it works, honest! >:(

(If it works with a 9 volt battery.....)

-D

Carbon 34 Grand Master

Carbon 34

Posted
Posted
Does anyone know a place that can test coil packs to make sure they are working properly!!!!

I am trying to rule one thing out at a time at the moment to find what is wrong with my car!!!

have you looked for the error codes on the computer first ?, checked the grounds and plugs for corrosion, pretty common?

Race__24 Experienced

Race__24

Posted
Posted (edited)

From what I have read around the place bench testing them isn't worth it.

If they are only charging $50 to do them they aren't testing them under load or at working temperatures. My guess is it's just a resistance check which can't rule them out as a problem, only at times confirm they are a problem.

Swapping them out is by far the cheapest and most definative way. Even if you can only get 1 known working one it doesn't take long to swap it through the 6 different positions. Once you have the coil cover off you can squeeze them in and out without having to undo anything else. All up it should take 2 hours max- that's if the last one you test is the one that's gone. I recon I could do all 6 in my stagea in under 1 hour

Also, if you cut off the lip at the back of the coil cover you should be able to get it in and out without removing the crossover pipe making future work easier.

Edit: not sure if you can get then in and out as easily on a R34, I've only done it on an R33 S2

Edited by Race__24
J_Red33 Experienced

J_Red33

Posted
Posted (edited)
From what I have read around the place bench testing them isn't worth it.

If they are only charging $50 to do them they aren't testing them under load or at working temperatures. My guess is it's just a resistance check which can't rule them out as a problem, only at times confirm they are a problem.

Swapping them out is by far the cheapest and most definative way. Even if you can only get 1 known working one it doesn't take long to swap it through the 6 different positions. Once you have the coil cover off you can squeeze them in and out without having to undo anything else. All up it should take 2 hours max- that's if the last one you test is the one that's gone. I recon I could do all 6 in my stagea in under 1 hour

Also, if you cut off the lip at the back of the coil cover you should be able to get it in and out without removing the crossover pipe making future work easier.

Edit: not sure if you can get then in and out as easily on a R34, I've only done it on an R33 S2

Just FYI there is a place that does this & last I knew, they did it for less than $50.... although it may cost that much by now.

The place is called Petro-Ject, located in Stepney (Ph: 81321622).

They will do testing on individual coil packs & heat them up to full operating temperatures & under high load. The guy that does it all has being doing the same kind of work for something like 12 years now & knows his stuff.

And just let them know that Jared sent you :D

Edited by J_Red33
Evil34 Experienced

Evil34

Posted
  • Author
Posted

thank guys, i have an intermittent missfire and no one seems to be able to rule anything out as there are no error codes coming up.

i have split fires already and they have done less than 5000kms in 18 months, so if it s them i wiil be pi**ed.

J_Red33 Experienced

J_Red33

Posted
Posted

Would almost have to be a defective coil pack after only 5000kms for them to be the issue. What boost & spark plugs & gaps are you running?

Do you have the original coil packs? I'd suggest you'd try these first if they worked ok when you removed them.

Evil34 Experienced

Evil34

Posted
  • Author
Posted
Would almost have to be a defective coil pack after only 5000kms for them to be the issue. What boost & spark plugs & gaps are you running?

Do you have the original coil packs? I'd suggest you'd try these first if they worked ok when you removed them.

The car spent 6 weeks in a mechanics trying to sort it out and all they came up with is that one of the ciol packs is slightly faulty as no error codes came up.

Just want to try and sort something as it is detracting from driving the car and my enjoyment.

Boost is only 10 psi and a .8 gap has been set with a fresh set of plugs as done by my mechanic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin · Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Rezz
      Spotted on the street....

      By Rezz · Posted

      Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...