Jump to content
SAU Community

Recommended Posts

Which site sell the rods for 1000, Beer baron ?i can get a 2.8 crank from my turner, hes orderd afew custom 2.8 kits of his own,il go with his 2.8 crank,tomei rods,mahle pistons,maybe tomei piston if they;re cheaper then the mahle's,

Who's the tuner?

HKS themselves say go step 2

This step 0 kit really is for small power outputs - given that the stock nissan cranks can go way past the power level of this kit, i dont see why anyone would buy it unless they want to be able to say they have a 2.8 - even then its the poor mans budget option

You already know HKS are very conservative with their power figures and this being the same material as a stock cast crank it will take the same amount of punishment except giving extra cubes. Don't know how you can possibly think it's not worthwhile?CheersMarty

I would expect this kit is to give you 2.8L response. I don't think it is designed for huge power or anything. Even HKS recommend use of GTSS turbos so max expected. power would be 360rwkw?

Sounds to me like a great idea for people who want the 2.8l response but don't want to spend huge dollars for step 2 engine.

This kit sounds like it would make a great street engine!

Edited by gtr fan

stroker kit or a Rb 30/26 , ive heard people have problems with the block sitting 50mm higher, any thoughts.

It's 38. Depends on what car you have. R32 there is a little more fiddling than a 33 or 34. I own a 2.8, give me a 3.0 anyday. That should answer it!

You already know HKS are very conservative with their power figures and this being the same material as a stock cast crank it will take the same amount of punishment except giving extra cubes. Don't know how you can possibly think it's not worthwhile?CheersMarty

I wouldn't have a problem sending it over a thousand horsepower, I cant count on my hands or toes how many cars here and Japan have done it on the stock crank, so I don't see how having another 200cc balanced crank is going to make it worse, quite the opposite I would suspect.

I wouldn't have a problem sending it over a thousand horsepower, I cant count on my hands or toes how many cars here and Japan have done it on the stock crank, so I don't see how having another 200cc balanced crank is going to make it worse, quite the opposite I would suspect.

Please, go do that and tell us how you go :)

You already know HKS are very conservative with their power figures and this being the same material as a stock cast crank it will take the same amount of punishment except giving extra cubes. Don't know how you can possibly think it's not worthwhile?CheersMarty

Yes I'm aware HKS (well, all Japanese companies) err on the side of caution with part ratings whereas here we just push them until they break or another component reaches its limit.

I'm a strong believer in the stock cranks being good parts and yes they've been proved over and over by various builds/shops so as for the actual power level this will deal with - well someone needs to push one and see - there was a lot of keen comments earlier in this thread but it seems to have died down which is a shame, but when you're comparing the step zero to other offerings out there I personally don't see it as worthwhile because IMO if you're going to spend the money and build an engine with a cast crank you may as well get the best increase for the money spent so unless you have to stay with the stock block for some reason, skip 2.8, go 3L and save some money.

When I blow mine up this will be one of the front running options, not having to f**k around with all the little things that you need to get a 30 in the car.

Drive a 30. That will change your mind very quickly!

It's 38. Depends on what car you have. R32 there is a little more fiddling than a 33 or 34. I own a 2.8, give me a 3.0 anyday. That should answer it!

would you loose much of the rev limit on a 30? i know with the stokers its limits you till about 8k if ive read correct. i aussume the down low torque would be quite nice tho, with some suitable turbos you would have a very nice resposnive street machine.

HKS themselves say go step 2

This step 0 kit really is for small power outputs - given that the stock nissan cranks can go way past the power level of this kit, i dont see why anyone would buy it unless they want to be able to say they have a 2.8 - even then its the poor mans budget option

You really do dribble some crap sometimes Stevo.

And back to the factual basis of this thread for those that continue to pm me asking me about my build.

Right now by bottom end is in the process of being balanced - I have the Step Zero complete kit, with crank, rods and pistons all of which will shortly have a new home inside a new N1 block, with a brand new custom specification head setup which is being ported built and assembled for me in Japan

There seems to be a large number of people that are very keen to see the real world results of this kit, and get an idea of its limitations. I am not aware of anyone else in the country that is running this kit yet but obviously that may be wrong. I would like to point out I was looking at the Tomei 2.8, HKS Step Zero, 1 and 2 2.8, and Nitto 2.7 strokers while deciding, and my decision was not purely dollar based, but rather it was centred around what i wanted out of the car and its application which is first and foremost circuit racing where response is critical, not high rpm. Obviously at its price point its a very attractive option for what it offers - The Step Zero is designed specifically for use with GT-SS type turbos, not big singles, and I was pushed over the line after seeing the results ATTKD has achived. Incidently, ATTKD runs this exact kit in the majority of its Time Attack cars, and it is responsible for some of the fastest Time Attack cars in Japan - That was enough for me.

ATTKD/HKS advised that the pistons and rods included in the Step Zero are the same as the those in the Step 1 and Step 2, so the crank is the only difference and as Martin has posted above, HKS is always very conservative in their power ratings. Just how conservative is something I full intend to explore as the car will be setup with somewhere in the region of 500-600awhp initially, and I may well up this later and see just how far the internals will go.

Hopefully I will have some photos to put up soon.

Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...