Jump to content
SAU Community

Recommended Posts

hey,

I have a plate in the back of my car, its next to the fuse box and where the battery is, i took it off and it has some hoses going from the left and from the right with 2 plugs on the top going into it, its making a fuzzy noise and im woundering what the hell it is haha,

Cheers

Curtis!

Link to comment
https://www.sau.com.au/forums/topic/305786-mysterious-thing-in-my-boot/
Share on other sites

hehe looks like its my fuel pump then ;) its making fuzzy noises from it when i rev the engine? is that good or not good? lol

How much gas do you have in the tank? Some get louder when it's getting very low, gurgle and what not.

Is it really loud or just a faint buzzing noise? If it's really loud it may have come loose and is vibrating against the wall of the tank.

its fairly loud, i got the back seat out and i can hear it just by taping the gas, i shove my head in the boot and its fairly loud, i wouldnt say its mega loud but its defently noticeable

its fairly loud, i got the back seat out and i can hear it just by taping the gas, i shove my head in the boot and its fairly loud, i wouldnt say its mega loud but its defently noticeable

Well it may be normal. You're probably only noticing it now because you've removed all the sound deadening between you and it. ie The aforementioned back seat.

With no rear seat I could hear my factory fuel pump whizzing away. Completely silent from cabin with the seat in though.

My Nismo pump was a fair bit louder when I first installed it but it became fairly silent even with the rear seat out after 1 tank of fuel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
    • House of Fatz dry dock needs a clean sadly one of the long time stables is leaving this weekend   see ya mr purple
    • Hence why I've only modified my car into a pure daily. Everything has to remain reliable & roadworthy, while providing value and grin factor. It also must not be handcrafted to the extent that the car will be immovable if something breaks because you cannot get or make a replacement to at least limp around with.
×
×
  • Create New...