Jump to content
SAU Community

Recommended Posts

Tolunene mix at 25% tolunene and 75% BP 98 Test. Calculated octane RON is 104!

This stuff rocks!

I often run Wynns race formula octane booster with BP 98, and I find it improves performance a small but, noticable amount in the upper rev range.

25% Tolunene is VERY noticable and from down low too. It knocks the spots off other octane boosters and this is why:

Ultimate 98 uses only 2% Aromatic compounds, and therefore is using the most advanced non-aromatic "octane boosting" additives to achieve 98 octane. A reason why octane boosters will work better with the Caltex 98(vortex its called here) is it has 5+% Aromatics.

As indicated the higher exhaust gass temperatures spool the turbo earlier, a symptom I tested over and over and over again. :P I could easily run higher boost and a little more aggressive timing but, since I have a ceramic turbine and a stock computer I will leave that for someone else to have fun with for now!

Any questions?

Link to comment
https://www.sau.com.au/forums/topic/3059-back-yard-race-fuel-diy/
Share on other sites

  • Replies 193
  • Created
  • Last Reply

Top Posters In This Topic

The method:

Buy a can of PURE toluene from a hardware store (they don't all carry it unfortunately) about $23 I got 4L for.

Go to BP service station

Put in the Toluene , I put 4L in .

Put in 3 times the amount of BP ultimate 98 as the amount of toluene. I put in 12L of BP98.

Presto 104 RON fuel to go! (tolunene has a RON of 122 baby!)

Oh yes the Myths:

Toluene corrodes the fuel lines ---- NO it doesn't.

Toluene is deadly poison ----- Yes , but no more harmful than petrol.

I am very interested in this as I was going to buy some C16 for Jamboree this year to help me into the 12's. I assume that C16 is 116Ron, is this correct? So is it possible to change the mix i.e. 40% Toluene and 60% BP Ultimate to make a higher ron fuel...I would like something up around the 110ron mark. Who is the best person to get to test the ron rating....

Originally posted by Stocker

Just so you know..Toluene is extremely carcinogenic, however, contact with the skin has to occur for this to be a problem, so just be careful when handling it.

Also, it will damage paint long term(it is/was used in paint as a thinning agent).

Regards, Andrew.

You are thinking of straight Benzene , mechanics used to wash their hands with it many years ago until they discovered it caused cancer. Tolunene is not linked to causing cancer.

Yes it is harmfull but, LESS harmfull than ordinary petrolium (It's still not a plaything tho') Please note the hazards identification, that tolunene is not linked to leukemia where as Petrol is.

Here is the mineral data safety sheet for say ultimate 98 :

http://www.msdsonline.com.au/BPAUST/msds/m...e=&uselogo=TRUE

And here is the MDS for toluene :

http://www.msdsonline.com.au/BPAUST/msds/m...e=&uselogo=TRUE

there you go, just so you know

:P

Originally posted by BOOSTMEISTER

I am very interested in this as I was going to buy some C16 for Jamboree this year to help me into the 12's.  I assume that C16 is 116Ron, is this correct?  So is it possible to change the mix i.e. 40% Toluene and 60% BP Ultimate to make a higher ron fuel...I would like something up around the 110ron mark.  Who is the best person to get to test the ron rating....

Well there is two parts to the octane rating RON and MON . The best indicator of performance is RM/2, RON + MON / 2 = RM/2 rating.

The RM/2 rating of Toluene is very very high at 114 RM/2.

there is no problem posed to your engine running 40% tol and 60% BP98 appart from possible cold start performance and low rpm issues in cold weather and the same issues of running too rich (doing this for long periods of time is not good).

At 60/40 your RON would be 107, the RM/2 of BP98 I can't find anywhere, it would be good to know.

Originally posted by turbomad

How much Toluene do fuel company's use to turn unleaded into premium or Optimax/Ultimate etc..?

Well since toluene is an aromatic ( benzene based molecule ); 2% of BP 98 is Aromatic whilst I think Optimax is upto 5%. I'm not too sure about this but if Optimax is BP's only 98 octane competitor then this is right according to Bp's own comparison chart.

At the end of the day our friends at BP claim the lowest Aromatic content and therefore will benifit from Toluene more.

I can't get the smile off my face, this stuff is very good:D

so we buy this stuff from bunnings, slop it in the tank with some premium & blast off to a lower 1/4???

surely if it was this simple everyone would be doing it???

i dont wanna be a skeptic, im just a bit wary of any side effects it may have.

will it harm the engine in any way or fuel system/plugs???

A lot of people do but not just as easy...most guys will buy stuff like ELF Racing fuel (103RON) which anyone can buy but the C16 / C21 you need a ANDRA license now to get the stuff. I suppose most don't like the idea of brewing stuff yourself incase you blow your motor to bits:)

good **** but you paying a premium

i was under the impression that toueen is benzeen. eg 100%tolueen is pure benzeen

you should get a low grade tolueen that is perfectly acceptable for 40 bucks for 20 litres. it has some impurities but when you compare it to normal petrol it is very clean to what you put in you tank. (bunnings you r getting arse raped at)

now if you go for the "****" as i like to call it, which is chemist grade tolueen you pay about 120 bucks for 20 litre (cost price from supplier)

with the crap **** i use 5 litres per tank and the good **** 3 litres per tank

anymore and you will be changing plugs regulary(due to misfire), cause of build up on the plugs

pete

I used VP C16 to stop detonation at the track, it was $100.00 for 20L and my engine didnt ping but there wasnt any real noticeable performance gain. It did idle lower smoother, and bosst maybe a little earlier.

Hume Performance in Liverpool Sydney supply VP racing fuels

Originally posted by blind_elk

Toluene = Methyl-Benzene.

A search of the net uncovered that it is not on the NIOSH carcinogen list, but it adversely affects the central nervous system.

Yes, all fuels do that hence some people like to 'sniff' them to get the central nervous system effect. If fact ALL

solvent based glues and paints have the same classification.This includes ordinary correction fluid like "liquid paper".

Toluene is nothing special.

Its a couple of years ago, but the cheapest way I found to by it was direct thru a Shell dealer, at the time (about 5 years ago) it was cheaper for 20l of methyl-benzene than 20l of avgas beacause methyl-benzene is classed as a solvent and not a fuel so it does'n't have the huge government taxes on it.

If you ask at a servo they'll just give you a stupid look, try performance shops or even Truck parts retaillers... i found them the cheapest and there used to supplying in bulk.

Originally posted by fatz

good **** but you paying a premium

i was under the impression that toueen is benzeen. eg 100%tolueen is pure benzeen

you should get a low grade tolueen that is perfectly acceptable for 40 bucks for 20 litres. it has some impurities but when you compare it to normal petrol it is very clean to what you put in you tank. (bunnings you r getting arse raped at)

now if you go for the "****" as i like to call it, which is chemist grade tolueen you pay about 120 bucks for 20 litre (cost price from supplier)

with the crap **** i use 5 litres per tank and the good **** 3 litres per tank

anymore and you will be changing plugs regulary(due to misfire), cause of build up on the plugs

pete

Toluene is not benzene, it has a benzene molecule and therefore is not 'pure' benzene.

You won't buy it from bunnings they don't stock it. Low volumes like 4L or 1L are expensive vs 20L / 200L drums.

Chemist grade toluene is available from BP and others for much less than $120/20L as toluene is very easily refined to 100% purity and the stuff from the hardware store is '100%' toluene, due to advertising laws and laws governing hazardous materials they must display any products other than toluene in the container even if only by a general class of substance.

3L of pure toluene in 60L R33 tank (55L BP98) will yeild 99.2 RON.

The fouling of plugs is a problem with Race fuels when mixtures are set for road fuels and the car is driven under light loads (around town). I reccomend toluene for the "day at the track" when higher boost and load are order of the day.

Rev210

I am waiting for a call back from the main BP distributor depot here in town, what should I be asking him to sell me?

Would they have a premixed fuel with a high RON or do I need to ask him for a can of Toluene then mix it myself???

Please help I expect his call soon.:P

Originally posted by BOOSTMEISTER

Rev210

I am waiting for a call back from the main BP distributor depot here in town, what should I be asking him to sell me?

Would they have a premixed fuel with a high RON or do I need to ask him for a can of Toluene then mix it myself???

Please help I expect his call soon.:P

Toluene ---- is what you ask for . Its a solvent availible in 200L and 20L volumes.

Don't go asking about premixed toluene -- they do it as a solvent, hence there is no fuel based tax on it. They will not mix it cause if they do they are breaking EPA laws and a bunch of other Tax laws.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...