Jump to content
SAU Community

Recommended Posts

Hi im from new zealand and recently i bought a r32 shell and i plan on dropping an r32 gtr engine into it. The one im looking at its imported from Japan and completely stock. I was wondering what was changed in the japanese engine to make it 276Hp so i could bring the engine to 320HP which the worldwide models came as stock.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/306112-rb26dett-help/
Share on other sites

"worldwide" model? The only R32 GTR that was released from Nissan was the 1000 GTR's in Australia in 1991 i think it was.

These horsepower numbers appear modest at first but stock RB26DETT engines have been dyno tested close to the 320 horsepower mark. The reason some RB26DETT engines put out 320HP and others don’t is due to environmental restrictions. In Japan, every production car is restricted to 276HP. Therefore, Japanese versions of the engine put out 276HP and unrestricted or non-Japanese versions put out 320HP.

Link to comment
https://www.sau.com.au/forums/topic/306112-rb26dett-help/#findComment-5065678
Share on other sites

Actually the Japanese models put out "a nominal 276hp". This is the result of the law in place in Japan, which penalised cars producing more than 276hp. So the manufacturers declared their cars to only produce 276hp, even though everyone knew they produced considerably more.

Link to comment
https://www.sau.com.au/forums/topic/306112-rb26dett-help/#findComment-5066260
Share on other sites

Also there was a small yellow restrictor in an air line that came on all stock RB26s. that limits boost/power on a stock engine to said 280hp.

when you remove that yellow thing, youll get a little bit more boost and more power...

Link to comment
https://www.sau.com.au/forums/topic/306112-rb26dett-help/#findComment-5069077
Share on other sites

the nismo 400r which was 2.8 litre and had a stock rev limit of 9000 and 400 hp coincidentaly was advertised as 280 hp

at least you wrote the question properly and said thanks . it goes a long way . where bouts in nz are you . im in chch

Link to comment
https://www.sau.com.au/forums/topic/306112-rb26dett-help/#findComment-5069340
Share on other sites

"worldwide" model? The only R32 GTR that was released from Nissan was the 1000 GTR's in Australia in 1991 i think it was.

100 were delivered to Aus in 2 batches. 30 went to racing and 70 were privately purchased.

Link to comment
https://www.sau.com.au/forums/topic/306112-rb26dett-help/#findComment-5069653
Share on other sites

the nismo 400r which was 2.8 litre and had a stock rev limit of 9000 and 400 hp coincidentaly was advertised as 280 hp

at least you wrote the question properly and said thanks . it goes a long way . where bouts in nz are you . im in chch

hey im in the waikato area

Link to comment
https://www.sau.com.au/forums/topic/306112-rb26dett-help/#findComment-5071451
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
    • Yes, well. Mine are less than half that. ARBs are not set to "dumb" either.
    • I would hope. But, we all know even the best companies have an issue sporadically.
×
×
  • Create New...