Jump to content
SAU Community

Recommended Posts

Hi every one. This is my result today with a HyperGears ATR43G4 600HP turbo externally gated on a stock RB25det.

Its got a .82 turbine housing running a .70 Comp cover with anti surge slots. Turbo's not brand new I've been told it came off LOWRB's KKR high flow setup, now running a Hypergear's .82 ATR43 turbine housing with RB25's OEM bolt on dump pattern.

Modifications needed for installing:

It needed 1x 20mms spacers to space out the comp housing from manifold.

The inner water line had to be bend as turbine housing was in the way.

Turbo's got a 4inch mouth, which I relocated the Z32 AFM between cooler piping and bolted on a 4inch 45 degrees elbow pipe to a Pod filter.

My car's a 94 model R33 S1. Its got:

850cc high flowed injectors from Created

Ebay cooler kit

Tomei 260 Duration by 8.5mm lift Cams

3inch exhaust with metal cat.

Tail 38mm external gate vented to atmosphere (drilled on top of stock manifold)

Z32 AFM

Z32 ECU with nistune chip and modified loom

This car has previously tuned on HyperGear's high flowed turbo at 240rwkws.

Now. 301rwkws / 403rwhp on 18psi full boost at 4500RPM . Car’s feels very strong on road and goes crazy after 4500RPM :rofl:.

post-31034-1266475572_thumb.jpg

Turbo, installation, and dyno tune costed me a total of $1000. Big Thanks to Nick at Phase autos and Stao from Hypergear.

Edited by kwickr33

tomei cams might help it come on earlier? plus the better turbine housing not kkr crap lol.

what exhaust manifold are u using kwikr33?

my bad just read tial gate on top of stock manifold

Edited by l0WRB
tomei cams might help it come on earlier?

That's always a hot debate item :)

I had my GT3040 (600hp) .82 rear, making 17/18psi by 4200rpm (280rwkw) factory cams. That was with a rather restrictive 3" exhaust... so might have been sooner & more power but i'll never know that stories end! :rofl:

So it's always subjective about cams in a lot of cases. IMO you don't need them... i certainly didn't. Nor did guilt-toy on his setup (a larger GT35).

I know he was going to test some cams i think for the sake of it, not sure what eventuated there though...

I did some comparison on the dynosheet page. It appears that RB25det with cams has better response then the people who doesn't.

Today's tune is not bad, but its still got abit of miss up the top not sure if the stock coil packs are getting old.

But yea external gate and cams would make a difference to boost and power curve.

You sure? I thought all the part numbers for the Procams were for RB20/RB25/RB26 which would mean no VCT and that the Poncams which are only listed as RB25 ones with NVCS were the only ones that supported VCT.

Nice work! Its hard to see how laggy it is as the axis is in road speed not rpm. But it sure looks to sit at 300rwkw for a long time!!!

So you mean the turbo purchase, the installation of the turbo and the tuning was $1000?? Or excluding the purchase of the turbo?

You sure? I thought all the part numbers for the Procams were for RB20/RB25/RB26 which would mean no VCT and that the Poncams which are only listed as RB25 ones with NVCS were the only ones that supported VCT.

Mmm you might be right actually... :D

either way good result!

Its currently running a RB25de cam gear with out the VCT. The $1000 was including the turbo, installation, all the bits for it and dyno time. I don't think Stao would offer some thing like that unless he wants some one to guinea cop his new turbos :( . After a set of spark plugs she's running pretty smooth. I'm considering to rise 3 more psi and see what she gets. Stao will you pay for my dyno time :) ?

Nick believe KM/H is more accountable. I had a look through the dynosheet section and it seems KMH/RPM scale varies from dyno to dyno.

I'm taking a average sacle of:

1KM = 39RPM. So you can work it out:

65 : 2535

85 : 3315

105 : 4095

125 : 4875

145 : 5655

165 : 6435

175 : 6825

His dyno's analyzer is broken. it can only show Power , speed and torque at this stage. Probably can get the car to run on another dyno once its tuned.

kwickr33: Let me know when you want to run on more boost. I can cover your dyno time thats not a problem.

Nick believe KM/H is more accountable. I had a look through the dynosheet section and it seems KMH/RPM scale varies from dyno to dyno.

I'm taking a average sacle of:

1KM = 39RPM. So you can work it out:

65 : 2535

85 : 3315

105 : 4095

125 : 4875

145 : 5655

165 : 6435

175 : 6825

His dyno's analyzer is broken. it can only show Power , speed and torque at this stage. Probably can get the car to run on another dyno once its tuned.

kwickr33: Let me know when you want to run on more boost. I can cover your dyno time thats not a problem.

id say hes too lazy to calibrate the rpm :) jks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...