Jump to content
SAU Community

Recommended Posts

Hi all, I bought a aerpro wiring harness for my R34 and I'm using the wiring diagram from here but the wire marked as "O" (Right Front Speaker (-)) is missing from the aerpro harness and there is a blank on that spot. Is this meant to be this way or did I get a faulty one? I wanted to check before I go soldering things up only to find there's something missing...

Link to comment
https://www.sau.com.au/forums/topic/308793-aerpro-wiring-harness-for-r34/
Share on other sites

that PDF is from USA , so its not 100% accurate in every type of car/stereo made by nissan, Remember Skylines were never sold or imported to USA till recently so to be safe always test the wires if they don't match up perfectly , you could just wing it... but the airbag or ECU could decide to fire a nasty surprise your way.

clinton,

looking at the back of the plug ( yes I bad that I actually know these pinouts)

spekaers are on the left power is in the middle key is on the right.

rears left rear is on teh right. RT Rear is on the bottom.

should give him a general idea.

(also your prado stuff has a delay - call me on monday.)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...