Jump to content
SAU Community

Damo's R32 Gts-r, On Going Project Fun Car. History And Use Full Info


Recommended Posts

the pipes are done and polished aparently much to my suprise. so ill get them back wednesday then have a crack next weekend at finishing them.

cams timing belt ect are back on to.

Nice, neat lobster backing! It seems like you made all the mistakes on mine and yours will be schmik.

i had so much fun building your dump that i just had to make another one. ive upgraded some of the tools thoe that are making all the difference. it wasnt a bad job that whole system for a pair of noobs.

It would have been un-australian to not have taken advantage of a day off and worked on my car today.

only a few hours thoe a i ahd to spend some of the day with the other half.

i collected my welding jobs and to my suprise my mate john had polished the pipes to.

DSC03923.jpg

he had done an outstanding job especialy for the price.

i put them back in and started on the centre section.

this is as far as ive gotten.

DSC03931.jpg

thats everything tacked in bar the front section of the rear pipe. im also only half way through making a splitter to put the 3 1/2 into 2 x 3" pipes

it looks ruff now but ill tidy it up.

DSC03930.jpg

i also started on the new colour scheme for my wheels as i got some more wheels recently and have finaly decided on what i want the over all car to look like.

DSC03927.jpg

DSC03928.jpg

its a bit of a wait and see now as i have a few more coats to go and i have to pain up the rears to match. hopefully they will look the part.

New dead line is an event around the 20th of Feb. so it needs to see the rollers in about 2 weeks. yay.

paints looking good but ill have to wait till all the rims have tyres to show them off. still a few more coats to do on the rears.

ive lined up some 295 tyres to have a play on once the rims are painted.

i spent a good hour or more trying to make the next part of the split pipe. third time lucky i cut the peipe just right to fit. im hoping to have the finished item back early next week. that will inspire me to get the rest of the engine together.

i made up the hot side cooler pipe last night. one pice from turbo to intercooler. ill put a pic up once thats done.

ive made up a bracket to mount my engine dampner to. (these are a grate bit of gear. and they save engine mounts) should get that back with the exhaust.

generaly heaps of little jobs done. will put some pics up after the weekend.

  • 3 weeks later...

just a small update.

these are the pipes before being welded and polished.

DSC03936.jpg

just for the haters. a gtr seat mounted on the stock seat mounts.

DSC03937.jpg

hot side cooler piping done. one pice turbo to cooler. this would be about the 10th revision of my cooler piping since i got the car.

DSC03945.jpg

engine dampener welded up. still have to fabricate mount on the engine side.

DSC03943.jpg

dump pipe braces to gear box to help cracking. i was going to heat wrap it but decided i better put a bung in for a wide band at some stage.

DSC03938.jpg

And the front wheels painted for now. rears are awaiting final coat.

DSC03942.jpg

DSC03941.jpg

hot side cooler piping was finished tonight just needs to be welded.

  • 2 weeks later...

thought id drag this back up.

no pic but weve had a massive few nights on the car and bar the a small amount of wiring and a diff the cars good to go. all then engine bits are back on just working on the finishing toutches. i got 50% of the floor welded back in so now i just need to finish that off. very happy with the results so far.

stay tuned for some pics.

Pic's dammmn it!!! ha ha ha.

Agreed :yes:

When i saw you masking up the wheels I was pretty skeptical because i like the colour scheme they were, but they came out pretty good :thumbsup: Would like to have seen them with the red on them still though

Agreed :yes:

When i saw you masking up the wheels I was pretty skeptical because i like the colour scheme they were, but they came out pretty good :thumbsup: Would like to have seen them with the red on them still though

thanks for the comments on the wheels. i seen this idea on a car from last years tokyo auto salon and that was on a full black and white car. ive since seen the same idea on an orange lambo in the states. it fits my way of thinking somthing a bit left field. i honestly dont like change but i like to try new ideas that people are to scared to do.

i left the red lip but it looked to much on the wheel. im sure the finished over all package will look the part. only a few days ago i came up with some stickering to tie them in with.

and as for pics. ill see how i go tomorow night other wise it will be during the weekend. but the section of floor that has been replaced now sports camo paint to blend in with the rest of it and my 4" intake pipe is repping some monster crinckle. its realy just a show car now. i hope it brakes down on the first few runs so i can sit in the pits with the bonnet up. haha.

  • 2 weeks later...

ok update time.

started the week looking at this

DSC03979.jpg

and this

DSC03980.jpg

i spent most of the week working on this shitter. everything i went to do required custom work. nothing went to plan as usual.

somthings i did were weld in the last half of the floor.

DSC03982.jpg

that ended looking like this

DSC03990.jpg

mounted the turbo up and made intake pipe

DSC03986.jpg

painted up and fitted my home made bomex type mirrors

DSC03991.jpg

and finished off the side pipes. wheels ect.

DSC03992.jpg

DSC03988.jpg

we also did a bit to my mates black drift car. he recently brougt an origin cabon GT wing

DSC03983.jpg

i ran the car at barsky yesterday but after a dozen runs the turbo shat itself. as vedence the turbo tried to eat itself.

DSC03996.jpg

this left me running a fair bit of peak.

we had 4 r32s down there for the day. one kept blowing fuel pump fuses because the metal baffel in the tank had come loose and was hitting the fuel pump wiring and shorting it outout. this is the seccond time ive seen these baffels come loose.

mine had boost issues then terminal boost issues. open wheeling diff. poor front end grip caused by bad alignment and tyre combo and a useless driver

bens car had a fuel leak and all the sensors i had wired into the dash the night before hadnt been calibrated so they didnt work

the black car had a "not accept throttle" fault that turned into being an open circuit wire between the tps and ecu. somthing that has now accured twice on cars i know, and a power steering pump missalignment fault that caused it to shread a belt, so we changed brackets from my dead 32 to his car an then the belt finaly broke. was very close to anyway, then we moved the pupm and bracket to be fitted like mine lower on the block due running out of belts. that fixed the belt shreading issue but the issue it has had for a long time of power steering going normal then hard then normal half way thrugh a corner was still present. that fault resulted in him loosing power steering during a scando and hitting a wall. luckily due to the massive wheels it only left paint marks on the rims and mirror.

as my car was out of action i also lent my coil packs to another r32 driver to allow him to continue drifting miss free.

to redeem the day i got to do track car V drift car time attack in the black 32. that was a ball. i havent had that much fun driving for a long time. pushing road tyres to there limits.

i also made this for fun.

DSC03987.jpg

nice mate. I still LOVE the side pipe effort. full credit mate, it's an awesome set-up and very practical. no more squashed/bashed/dented/ripped off exhaust pipes for you. :)

nice mate. I still LOVE the side pipe effort. full credit mate, it's an awesome set-up and very practical. no more squashed/bashed/dented/ripped off exhaust pipes for you. :)

thanks mate

i think every one that seen them on the week end aproved. i can say thoe that they are noisy as hell inside the car. somthing i will have to adress once its going again.

Car is looking really good Damo, shame about the turbo... surely its not even that old?

And as for noisy in the car, I found the best way is to get a better helmet with ear muffs and that :P

Hey damo, just stuff the sound shield box full of fire blankets... help cut the ressonance down.

Dude--- sucks about the turbo!

You know, I recon a nice set of red top rb20 rocker covers in crincle red would look good toooo.... :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...