Jump to content
SAU Community

Recommended Posts

This is a true story that happend to me - Tyres are Khumo 265/35/18 Esta less then 10,000k had a pucture but I didnt realise it was flat as I rarely drive it and I dont know how long I have been driving on it for. Finally realised it when i went to check tyre pressure ( usully check every 3 month ) Fixed the puncture ( was a small screw )

Driving 60km is fine, anything over 100km/hr car shakes real bad ( got front wheels aligned when i got new tyres ) still shaking over 100km/hr before Xmas to pass Rego before i went on 5wk holidays.

Came back on holidays and found pigeons have made nest on my Balcony - having no choice as i dont want pidgeon poo every I got rid of the two eggs ( this is like the 4th time they set nest on my balcony - one time I let them hatch and let the pidgeon grow up and fly away - but cleanup was yukk never again 3 months of pidgeon poo ). and then on Australia day went for a drive to the cemetary at Pinegrove. I checked tyre pressure before i went and pumped it to 40.

Coming back from Pinegrove to Parramatta, heard the loadest POP, loader then exhuast backfiring. Pulled over into side street as i knew i had a flat tyre. Changed it with the space saver. Space saver was a bit soft was OK - but less then 50 meters it gave out also. So i limped all the way back home as i ran out of options.

khumo1.jpg

khumo2.jpg

khumo3.jpg

space1.jpg

space2.jpg

should have stayed home that day.

Link to comment
https://www.sau.com.au/forums/topic/309137-has-this-ever-happened-to-you/
Share on other sites

k what happened to your tyre is when u got the puncture repaired it was done on a tyre that was run well under pressure which damages the internal side wall of the tyre and that is the reason for the blow out.

you should also when you check your tyre pressures also check that of the spare tyre so u would run into this problem

+1 for the pigeons.

as for your tyre letting go, driving on it flat is what did the damage. then it probably would've had an egg on the side which caused the vibration and it eventually let go.

oh and i check/alter the pressure in my spare every 6 months.

what the f**k +1 what do pidgeons have to do with this story.

i use to get blow outs like this when i ran kumho's on my accord euro admittedly was low as fk but tyres would wear out in 5000ks cos of camber and 3 of the rear's blew out same as this, but not from driving while flat *shrug*

Lol at the Pidgeons.

That'd scare the heck out of me. I dont even carry a spare.

Once you've had a drive on them when they are flat then its generally too late to replace. When the flat tyre comes off the rim (if its been driven whilst flat) its usually filled with powdery rubber.

The only time i've ever had a tyre blow out on me was a long time ago when my ol Lancer got into a drift (in the dry around a corner, NO handbrake) hit a gutter side on and blew out front and rear passenger side tyres. Needless to say that only ever happened once a very long time ago now.

what camber are you running? seems odd to have the space saver roll off the rim too, unless it was dead flat and you were driving too fast.

Maybe the pidgeon's sabotaged your tyre, slashing it with their katana's when they realised you eated their eggs for breakfast that day..... hmmmmm

n48059684620_8602.jpg

I always check my pressures everytime I fill up (once a week) and the spare once a month.

Oh and if you're not a pleb, you can feel when you have a tyre with lower pressure.

Edited by bubba

As said driving whilst flat/low pressure will damage the sidewalls, so replace the tyre.

To the fella with the accord euro, a relatively crap tyre with way too much camber (and probably too much toe) will put huge amounts of load on the hinge point of the tyre, which is probably why you got so many blowouts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...