Jump to content
SAU Community

Recommended Posts

Not the informeter, there is no input for it. I do all my logging with the Emanage Ultimate, wideband included, then I send the log to my tuner who rings me back and tells me if I need a re-tune after each mod. lol.

According to this link you spice the wideband in the pink wire on the infometer.

  • Replies 234
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Very nice find, I haven't seen that before. Might be a better gauge than the innovative one I use...

Well I've got one on order and it would be a bonus if this works (no reason to believe it doesn't). Pink must be an analogue input but I am not sure it's left free if you run the sensor adaptor also. Though having looked thsi picture of the wiring set-up it looks like the pink is still available even with the three external sensors = possible win.

16401702_1.jpg

Yeh, I have the external sensors all plugged in, which means I cant run the serial connection to the Emanage. I cant remember offhand if the pink wire was free.

I wonder if there are any other sensors I can plug in...

i wish i could get it to dim at night time. or when my headlights are on.

anyone know that one?

Mine doesn't dim either, so I just reduced the backlight to around 30%. Still fine in the day, and much better at night.

Hey quick question to all. How hot water temp is to hot. Hit 99 today in traffic and got little worried as I set alarm at 97. Air intake was at 76 :S

Mine does this also, in fact; those are the exact same peak numbers as on my Informeter. It's not nice to look at, but before you had the Informeter it was exactly the same; you just didn't know it.:whistling:

You have to understand this isn't an HQ holden, these engines are designed to run in the mid 80's minimum.

Modern engines run tight tolerances and the running temperatures reflect that, higher engine running temperatures also promote better emissions (notwithstanding the rich/retard things cars do when the weather gets really hot).

My last Honda road bike (CBR 929RR) had a digital temp gauge; running temp was 89 deg, would routinely run out to 106 deg, fan would come on drop it to 98 deg. I once rode it on a 47 deg day with a pillion, with the temp gauge sitting on 102 deg for 5 hours. I did 75000km on this bike and when I sold it it went EXACTLY the same as the day I bought it. Most Honda road cars, the optimum running temp is 90 -95 deg, it's just a number.

The cooling system is under pressure (10- 15psi is normal), water does not boil at 100 deg if it is pressurised. (I think the rule of thumb is an extra degree for every psi of pressure)

As Cephas says; the thing to worry about, is if the car doesn't cool down once you're moving (more than 70km/h). This means the cooling system, or the volume of water in the system is inadequate for the purpose.

Of course, any amount of heat you can remove from the syatem is a good thing (i.e external oil or trans cooler ducted AWAY from the radiator) just gives more headroom for the system to operate in extreme conditions.

Edited by Daleo

mines hit 107 before in hot weather with the AC on. this was stop start traffic

lately its been around 90-99 in stop start. once im moving at 60km it drops back to mid 80s. im not so worried anymore now other people are having similar numbers. i also have a nismo thermostat which i think was a stock one in a nismo box

Yeah. I average near 90 on hotter days. Hit 99 and got worried so took back roads where I wash sitting still and dropped to 94-95. Air temp was high 60's still though.

Need standard airbox! Any body know where I can get one without selling my liver?

Yeah. I average near 90 on hotter days. Hit 99 and got worried so took back roads where I wash sitting still and dropped to 94-95. Air temp was high 60's still though.

Need standard airbox! Any body know where I can get one without selling my liver?

Got to 101 in traffic....intake temp got up to 79!!!!

Talk to zei20l.....pretty sure he has a spare standard airbox!

Ok I thought it was just me with high intake temps. As when I opened the bonnet it dropped 5 degrees within seconds. Also driving with bonnet open shows marked improvement with my crappy pod. But cant drive with the bonnet open around streets.

Can anyone with a leaf screen AND an informeter comment on the fuel consumption readouts from the informeter? Mine seem to be so far wrong its comical (Im assuming the leaf screen is accurate - Ive never heard reports to the contrary)

Well it depends on how often you reset your informeter. My average is quite accurate with leaf but trip is a little off. Haven't really tested it though. I find the actual leave compared to the currant usage on inform to be the same.

But my throttle seems never to go below 10% lol dunno why

Can anyone with a leaf screen AND an informeter comment on the fuel consumption readouts from the informeter? Mine seem to be so far wrong its comical (Im assuming the leaf screen is accurate - Ive never heard reports to the contrary)

lol I purposly didnt set these up, and the leaf screen i shut off.

250k per FULL tank is not something you wanna see lmao

Edited by AaronNM35

lol... that's 2 days to work and back for me!

I dunno how you put up with it mate

well everytime i try to get a tune onto it, i either get exited and find something else i wanna do first.

or my turbo blows lol

Because its stuck in my shed with no turbo. Cheap to run if you dont drive it. lol.

^^ and that.

Scott wish shayne for me!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...