Jump to content
SAU Community

Recommended Posts

whats the go with the Crappy Spare wheel wont even fit over my brakes on my Type-M R32 GTST

WHats the point in a space saver wheel if it wont fit over the brakes.

anyone else have this problem...is it worth getting some spacers or something cos if i break down im stuffed...im carrying around extra weight for nothing.

Link to comment
https://www.sau.com.au/forums/topic/30968-r32-gtst-crappy-spare-wheel/
Share on other sites

This is not good... Umm anyway, apparently 16inch falcon pursuit rims will fit, AND cover the brakes. Im looking at getting one as a spare for my car, as I really dont like the idea of a space saver.

Yeah, last time i got a slow leak i used tyre weld or something which went well for a couple of weeks until i got new tyres. Problem is it won't fix a tear in the side wall.

You need to change a wheel front to back to use a space saver, i found that out on my old rx7.

yeah that sounds good...the space saver is useless....it didnt fit on the rear either...well i didnt want to forse it on cos i had just painted the brake calipers

Thats pretty rooted then. I had always assumed it'd fit the rear at the very least. Time to turf it in the name of weight reduction :P

Or put it on backwards for that deep dish look

hawker05.. the space savers fit on both front and back, so you've got one from another car... as for burn outs, I've seena few people use them and that actually last quite a long time.. hard rubber I guess...

Fit two on the back and go for a drive, quite entertaining, well, when you have 2x Skyline ones that fit...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...