Jump to content
SAU Community

Recommended Posts

i have a friend that lives in maroochydore, qld and he's yellow 1993' rb25det was stolen a while ago, not sure if asking on here is any help but its worth a try, is there anything i can do to possibly track down the car? it was a professional job a few cars got done in his street the same night.

Link to comment
https://www.sau.com.au/forums/topic/310126-how-to-find-a-stolen-car/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Three reasons to steal a car.

# Joy ride

# Sell for parts

# Re-birth

Only 1 of those usually results in getting the car back. Guess which one. The answer is no, you can't do sh*t and odds are if it was a 'professional job' then he won't be seeing his car ever again.

+1 for insurance so long as it's 'Agreed Value' Comprehensive & all mods and updated rims noted.

Insurance companies tend to screw the policy holder if he/she only has 'Market Value'

Edited by CARSICK

lol musta been a kid or something, after working around cars for a while i realize they're really easy to steal.Not that i'd steal a car as i've always had my own so theres no need, i had a sunfire with PASSLOCK and installed an ignition from an older car that didnt have it but theres a way to bypass it with a resistor, well i had to use a multimeter first but when i put that on it did something to it and bypassed it lol.The theft light just flashed all the time after that.

gone in 60 seconds, best movie in the world :P, my mate is pretty aware that theres a very little chance of getting it back, i told him id just ask and see what other people say incase there was like a special investigator or something we could go to, but if it's been used for parts or something like that it could be on 50 different r33's around the world lol. im pretty sure the most professional person could not steal my car right now, they would have a fulty immobiliser, most of the turbo side pulled appart, electrical wires unplugged everywhere under the hood, it has no oil or coolant & on ramps with the front spoiler removed, ha.

to have more of a chance of someone not stealing ya car try,

Parking next to kerb and turning the wheels fullock into the kerb till the steering lock pops.

If you park your car out the front of your house try park it under a street light

If you park you car out side your house and its a daily, work out how much fuel u need to get to work each day, say it be 15L, Put 15-20L of fuel in each morning, instead of filling up at the start of the week, that why the dicks will

have to get fuel once they take off in ya car, or they will run out near by your house.

Always have a kill switch, even no they are stupid easy to get past, have a ignition kill switch and a fuel pump kill switch put em in random spots, anything to slow them down abit,

Alarm well thats the same as the switch its goin to slow em down....

Steering lock, they easy to, but i still like to put one on.

Other people ive seen with those biggass yellow Wheel locks that rap around your rear wheel, a bitch to put on everynite, but hey... they work.

Flame me as much as u want, i still think doin all these things would make it harder for somone to steel your car, i dont care what anyone says.

it took me and my dad 45 mins a really low car reailer & allot of sweat & tears to get my lowered skyline onto a car trainer not to mention i cracked the center muffler doing it, it also made a hell of a noise with chains and what not, im sure id hear it happen.

think tow truck.

meh, club lock, alarm, immobiliser, even take the coil pack loom off or the coilpacks if you're that paranoid, if they still take it they are likely pros and have been sussing it out for a while.

I've heard of people having D shackles set into concrete floors so that chains can be put through the wheels (have seen pics of this done in a garage which housed a VL Group A lol).

think tow truck.

meh, club lock, alarm, immobiliser, even take the coil pack loom off or the coilpacks if you're that paranoid, if they still take it they are likely pros and have been sussing it out for a while.

I've heard of people having D shackles set into concrete floors so that chains can be put through the wheels (have seen pics of this done in a garage which housed a VL Group A lol).

Ha ha ha... I like that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't think the shuffle can damage the turbos. It only happens at low shaft speeds and loads. It's just annoying (to some people - others are tickled by the effect) and it quite possibly reduces spool performance a little bit.
    • Oh dear. The panel beating needs to be done before the filler work. Do you have a photo of the dent before you started? Hard enough to not flex and only hit the high spots?  What do you mean it was just temporary? 
    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
×
×
  • Create New...