Jump to content
SAU Community

Recommended Posts

Heya all

I've done some laps at wannaroo short track on shitty old street tyres and got a pretty good time while slidding all over the place:) 60 secs flat

Would like to put some half decent tyres on my spare rims 17x8 and 9inch. Currently running 18x8 on my street rims but i've heard 17's are better for racing.

The car was set up for drifting but im kinda liking the track work. Its an r32 with a rb25 neo, 280rwhp, all suspension and handeling has been sorted just need to sort out some tyres.

There are so many different tyres out there and diff reviews but if someone that has tried diff tyres on this sorta car and horsepower pls send me in the right direction

Cheers

Dan

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

from what i have witnessed i reckon the best r-spec radial sprint tyre is the advan a050's atm. i've seen a few people run pb's recently on them

We ran them on the Evo 4 at Lake Mountain over the weekend.

An amazing tyre over the 9km stage and certainly a good option now that RE55s are stupidly expensive.

I personally think A050's are the quickest tyre out there at the moment, closely followed by the O3G's. Imo, the O3G's last a little better though. Need to keep in mind that compound/wear wise, a "soft" AO50 is really fairly equivalent the a "medium" O3G.

re55/dz03g/a050 would be my pick.

I won't run a050 for racing since it only comes in soft and medium but it would be ok for sprints.

out of re55 and dz03 I take the dz03 because they are better if it rains. about the same in the dry

  • 2 weeks later...
I'm currently on a set of KU36, they're pretty good, for what they are. I've found them about 2 seconds slower on a minute lap track. One quarter of the price though.

Really thats not too bad:) when they get too hot do they loose some grip or are they pretty consistent? Is there a tyre pressure you could recommend for my car, r32 with a bit extra weight in the front cause apperently the rb25neo is a bit heavier?

Federal 595 RSR's seem pretty good too, similar to the KU36 but a bit softer. Road legal for the non trailer queen mob.

and about 1.5 times the price. You can get R888s for that, not that they're much better.

I just bought a set of 215 & 240 x17" medium compound Kumho slicks for the price of RSRs. Admittedly the Kumhos were on special, but so are the Feds...

and about 1.5 times the price. You can get R888s for that, not that they're much better.

I just bought a set of 215 & 240 x17" medium compound Kumho slicks for the price of RSRs. Admittedly the Kumhos were on special, but so are the Feds...

Nah, I got quoted $176 each for Federal 595 RSR in 255/40 17.

and about 1.5 times the price. You can get R888s for that, not that they're much better.

I just bought a set of 215 & 240 x17" medium compound Kumho slicks for the price of RSRs. Admittedly the Kumhos were on special, but so are the Feds...

where did you get the slicks from?

sounds like a damn good deal

Nah, I got quoted $176 each for Federal 595 RSR in 255/40 17.

that's extremely cheap compared to their normal prices. Its damn near the normal 595SS price. I'd go out and buy a set tomorrow at that price! was it from option1?

zebra, any Kumho motorsport distributor can hook you up. http://fsport.com.au/special_offers.html

that's extremely cheap compared to their normal prices. Its damn near the normal 595SS price. I'd go out and buy a set tomorrow at that price! was it from option1?

zebra, any Kumho motorsport distributor can hook you up. http://fsport.com.au/special_offers.html

Yeh Option 1 Harry, I may get a set. My RE55's are buggered and the tyres I've been trying to import have been held up due to a payment transfer messup.

Really thats not too bad:) when they get too hot do they loose some grip or are they pretty consistent? Is there a tyre pressure you could recommend for my car, r32 with a bit extra weight in the front cause apperently the rb25neo is a bit heavier?

I'd aim for 42 hot mate. So start at around 38 cold and bleed them back straight after your first run. Others may have some input on this, I am by no means the expert re this particualr tyre, and have only experimented a little.

I'd aim for 42 hot mate. So start at around 38 cold and bleed them back straight after your first run. Others may have some input on this, I am by no means the expert re this particualr tyre, and have only experimented a little.

I got my best times on the KU36 starting at 36psi cold. Didn't make note of the hot pressures. But the heavyweight Supra probably put a couple of extra pound in them through heat than your lighter R32.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...