Jump to content
SAU Community

Recommended Posts

Heya all

I've done some laps at wannaroo short track on shitty old street tyres and got a pretty good time while slidding all over the place:) 60 secs flat

Would like to put some half decent tyres on my spare rims 17x8 and 9inch. Currently running 18x8 on my street rims but i've heard 17's are better for racing.

The car was set up for drifting but im kinda liking the track work. Its an r32 with a rb25 neo, 280rwhp, all suspension and handeling has been sorted just need to sort out some tyres.

There are so many different tyres out there and diff reviews but if someone that has tried diff tyres on this sorta car and horsepower pls send me in the right direction

Cheers

Dan

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

from what i have witnessed i reckon the best r-spec radial sprint tyre is the advan a050's atm. i've seen a few people run pb's recently on them

We ran them on the Evo 4 at Lake Mountain over the weekend.

An amazing tyre over the 9km stage and certainly a good option now that RE55s are stupidly expensive.

I personally think A050's are the quickest tyre out there at the moment, closely followed by the O3G's. Imo, the O3G's last a little better though. Need to keep in mind that compound/wear wise, a "soft" AO50 is really fairly equivalent the a "medium" O3G.

re55/dz03g/a050 would be my pick.

I won't run a050 for racing since it only comes in soft and medium but it would be ok for sprints.

out of re55 and dz03 I take the dz03 because they are better if it rains. about the same in the dry

  • 2 weeks later...
I'm currently on a set of KU36, they're pretty good, for what they are. I've found them about 2 seconds slower on a minute lap track. One quarter of the price though.

Really thats not too bad:) when they get too hot do they loose some grip or are they pretty consistent? Is there a tyre pressure you could recommend for my car, r32 with a bit extra weight in the front cause apperently the rb25neo is a bit heavier?

Federal 595 RSR's seem pretty good too, similar to the KU36 but a bit softer. Road legal for the non trailer queen mob.

and about 1.5 times the price. You can get R888s for that, not that they're much better.

I just bought a set of 215 & 240 x17" medium compound Kumho slicks for the price of RSRs. Admittedly the Kumhos were on special, but so are the Feds...

and about 1.5 times the price. You can get R888s for that, not that they're much better.

I just bought a set of 215 & 240 x17" medium compound Kumho slicks for the price of RSRs. Admittedly the Kumhos were on special, but so are the Feds...

Nah, I got quoted $176 each for Federal 595 RSR in 255/40 17.

and about 1.5 times the price. You can get R888s for that, not that they're much better.

I just bought a set of 215 & 240 x17" medium compound Kumho slicks for the price of RSRs. Admittedly the Kumhos were on special, but so are the Feds...

where did you get the slicks from?

sounds like a damn good deal

Nah, I got quoted $176 each for Federal 595 RSR in 255/40 17.

that's extremely cheap compared to their normal prices. Its damn near the normal 595SS price. I'd go out and buy a set tomorrow at that price! was it from option1?

zebra, any Kumho motorsport distributor can hook you up. http://fsport.com.au/special_offers.html

that's extremely cheap compared to their normal prices. Its damn near the normal 595SS price. I'd go out and buy a set tomorrow at that price! was it from option1?

zebra, any Kumho motorsport distributor can hook you up. http://fsport.com.au/special_offers.html

Yeh Option 1 Harry, I may get a set. My RE55's are buggered and the tyres I've been trying to import have been held up due to a payment transfer messup.

Really thats not too bad:) when they get too hot do they loose some grip or are they pretty consistent? Is there a tyre pressure you could recommend for my car, r32 with a bit extra weight in the front cause apperently the rb25neo is a bit heavier?

I'd aim for 42 hot mate. So start at around 38 cold and bleed them back straight after your first run. Others may have some input on this, I am by no means the expert re this particualr tyre, and have only experimented a little.

I'd aim for 42 hot mate. So start at around 38 cold and bleed them back straight after your first run. Others may have some input on this, I am by no means the expert re this particualr tyre, and have only experimented a little.

I got my best times on the KU36 starting at 36psi cold. Didn't make note of the hot pressures. But the heavyweight Supra probably put a couple of extra pound in them through heat than your lighter R32.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...