Jump to content
SAU Community

Recommended Posts

Has anyone installed a cruise control on an R33. What brand, supplier etc and most important, does it work.

Asked about Nissan ones [eg ex Maxima, pulsar etc], but nobody seems to be able to give a first hand account or answer.

Be handy for trips down the Hume or Sturt Highway's etc.

Link to comment
https://www.sau.com.au/forums/topic/31314-cruise-control/
Share on other sites

Tried that, talked to Darrin at Just Jap, and yeah, he agreed that there is *some* provision for one in the R33, but he'd never seen one fitted.

Even in the owners handbook they mention how to operate the cruise control [where fitted].

Link to comment
https://www.sau.com.au/forums/topic/31314-cruise-control/#findComment-632266
Share on other sites

  • 2 weeks later...

I wouldn't mind cruise as well.....the only one i have heard about is an aftermarket unit that interfaces with speed sensor and tps directly (no need to hook up the throttle cable etc). The controls are radio (or iR?) and can be steering wheel mounted.

Anyone know the company that makes these?

Link to comment
https://www.sau.com.au/forums/topic/31314-cruise-control/#findComment-649143
Share on other sites

hey i was desprate for cruise control too, cos i do heaps of freeway driving etc... but i had another idea...

what about getting an adjustable speed limiter? that way you could have it off for track days :D max speed >180KM/hr and you could say adjust it to 110km/hr for freeway? then you would just have to hold the accelerator? so its not comlete cruse control but it would help? you could also set it for 60km in the city etc...?

Link to comment
https://www.sau.com.au/forums/topic/31314-cruise-control/#findComment-649206
Share on other sites

Supercheap in Qld carry one....but it connects up via the throttle cable.  I had it half set up but now i've changed to a front throttle body i'll have to start again. Fairly low on the priority list at the moment.

Jay do you have any more details on this?

Brand? Price? Ease of installation?

Link to comment
https://www.sau.com.au/forums/topic/31314-cruise-control/#findComment-649215
Share on other sites

You can use the cheap one they sell at autobarn/supercheap, around 200 gets you the complete kit, I have used one for years and had no trouble, in fact, I think these units are more accurate than MANY factory ones.

Its a vacumn one, meaning, it has a vacumn line from the manifold, (thru a one way valve) to a pair of valves and a large diaphram connected to a cable - to your throttle.

You also put in a pickup coil and magnets on yoru tailshaft.

I went one step further and put on two racy looking push buttons on my steering wheel, wired them up to a small UHF transmitter key and hid that in my steering wheel. Wired up the UHF reciever unit under the dash, to the cruise control unit, and wallah, working cruise control.

When activated, the unit takes over control of the speed and keeps it on the speed you set it at + or - 1km/hr. Preddy darn accurate if you ask me. I dont know how I lived without it.

Link to comment
https://www.sau.com.au/forums/topic/31314-cruise-control/#findComment-649928
Share on other sites

yes and yes

altho, for a manual car, you have to install a switch on your clutch pedal so it drops the unit out when you put your foot on the clutch (simple limit switch, any electrician can show you)

this extra switch does not come with the basic unit. You can order one, but its cheaper just to get a limit switch from dick smith electronics and use that.

Link to comment
https://www.sau.com.au/forums/topic/31314-cruise-control/#findComment-650464
Share on other sites

Hi guys

rs73 wasn't quite correct, the one I installed was on a R34, not a R33 - but it would work fine on a R33 as well.

.. and the biggest difference you get between the cheaper and more expensive cruise control is how good they work, ie how constant the spead is, particularly overshooting at the top of a hill and slowing down at the start of the hill.. I'm not sure why this is so - it could be the electronics, or it might be the precision of the device moving the throttle cable - but I've found the rostra one to work better than any cruise control I've ever used on any car...

Ian

Link to comment
https://www.sau.com.au/forums/topic/31314-cruise-control/#findComment-650572
Share on other sites

Damn I was really wanting a Cruise Control fitted to my manual R33 just to help prevent speeding fines and also to stop my ankle from going to sleep but after looking at Ian's thread it looks like you won't get change from $1,000 :)

If it was <$300 i'd get it instantly but $1,000 .... I gotta do afew more important things first.

Link to comment
https://www.sau.com.au/forums/topic/31314-cruise-control/#findComment-650589
Share on other sites

Benm - Then get the command cruise unit from autobarn....they work great.

Like Ive said before I've used one for years and years and swear by them.

I think poeple have to also realise that when you install any cruise control, It must be calibrated to the road properly, or it will overshoot and not stay accurate.

Link to comment
https://www.sau.com.au/forums/topic/31314-cruise-control/#findComment-650710
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...