Jump to content
SAU Community

R35 Mailorder Tune Results

LSX-438

By LSX-438,
in R35 GTR

 Share

Recommended Posts

LSX-438 Mentor

LSX-438

Posted
Posted

Last year i was unable to run a tune in the supersprint championships (as i was in class 2D and awd/turbo cars must run stocker calibration) however this year i have been running a tune from Martin at Willall with great results thus far. I had tried another tune from elsewhere previously however it was earlier on in the R35 development cycle (before the latest boost control logic) and initially i was lapping SLOWER when we tried it - simply because the power would spike quickly resulting in wheelspin city! Fun on the street (it was a bit rollercaster like) but not exactly optimal for lap times.

Queue the new Cobb boost control logic; the tune was emailed to me from Martin and uploaded via the Cobb in a few minutes. The result is a more linear application of boost, and substantially less wheelspin / easier to manage on the circuit. For those interested here is the dyno results i had done INDEPENDENTLY in Sydney yesterday. We ran it up in 4th (339awkw) *AND* 3rd gears (353awkw) to satisfy curiosity. Print out from 4th gear run is below. I am pretty happy with the tune, considering it's a mailorder job with no trimming, the boost and AFR's look good to me (although i am no expert obviously). Thanks Martin. The more valuable apspect to this new boost logic is the on-track application of power. We'll be heading out to Wakefield Park next week to improve on our lap records, stay tuned!

dyno.jpg

Link to comment
https://www.sau.com.au/forums/topic/313469-r35-mailorder-tune-results/
Share on other sites
LSX-438 Mentor

LSX-438

Posted
  • Author
Posted

i didnt bother with the off-the-shelf cobb maps.

Whilst i say the tune has not been trimmed, Martin has sent me a couple of enhanced updates as he has found a few issues after his own on-track experience, that sort of support is gold. I have to say the car has performed flawlessly thus far & like a stocker in terms of street manners.

  • 3 weeks later...
09GTR Collaborator

09GTR

Posted
Posted

Jim at CRD has just finished the latest tune on my car, now running a consistent 395 atw kw, holding 19 pounds boost all the way (almost) to red line. Cleaned all the sensors, new plugs, - its like getting a new car again. Its amazing, but the car drives so differently, the power delivery is instant and savage the whole way to red line. I'm, going to WSID next wednesday night to try and beat my last time (10.89). Based on the on street improvement, I'm pretty confident I can beat it if I get a good launch.

Whats even better news is that CRD reckon this tune is good for the track. I can lower the boost levels by 2 -3 psi and dial out wheelspin for track use - should still be good for 380kw plus atw on track.

On road, at 19psi I'm getting some sensational wheelspin in second gear, its like driving a V8!

Who said these things didnt have a soul?

70RTY Enthusiast

70RTY

Posted
Posted

I received my COBB AccessPort with mail order Willall tune a few days ago. After a simple 20 minute installation process, I was on my way. The car feels stupidly fast on the street now! It seems to come on boost harder now and the acceleration is laugh out loud fun.

As I have only driven on the street at this point, it is hard to give too much valuable insight into the cars performance after the COBB tune. I can say it feels significantly faster and seems to be terrific bang for buck value. I am booked in for a track day this coming weekend so I will report back after that. If I get the opportunity, I will run the car on a dyno at some point.

Also, I think it is probably just my imagination, but the transmission seems to shift a bit smoother. I can't say this is definitely the case.

LSX-438 Mentor

LSX-438

Posted
  • Author
Posted
you guys are damn brave running a generic tune at the track before checking it is safe on a dyno first! $30k gamble isn't it?

There's always an element of risk with any tune, i guess more with a non-custom job yep. However a number of us have had a good experience with the willall tune, on relatively stock cars, seems to be backed up by track and independant dyno results which confirm the tune is good. So it's not an entirely uninformed decision.

Duncan Grand Master

Duncan

Posted
Posted

understood....but factory tunes are designed to be safe with the variation of actual cars and conditions they are run under. any tune which makes more power as a result has less margin for safety. maybe a little less, maybe a lot less. either way I bet it does not come with an egnine rebuild guarantee.

I've got no issues with a mail order tune, and I have run one in my race car - but I would always spend $50 to check it on the dyno before hitting the track.

LSX-438 Mentor

LSX-438

Posted
  • Author
Posted
understood....but factory tunes are designed to be safe with the variation of actual cars and conditions they are run under. any tune which makes more power as a result has less margin for safety. maybe a little less, maybe a lot less. either way I bet it does not come with an egnine rebuild guarantee.

I've got no issues with a mail order tune, and I have run one in my race car - but I would always spend $50 to check it on the dyno before hitting the track.

good advice, very true.

Dominic Rising Star

Dominic

Posted
Posted

I finally tested the car at a Dyno today, to ensure the speed limiter was off and we went up to 220km/hr so assume its OK.

Whilst doing this we measured the power and A/F ratio and were pleasantly surprised.

2008 Nissan GTR running stock 20in wheels and run flat tyres @ 32 psi

mods= centre pipe changed only

Running 17 psi on 98 Octane with Willal tune

366.9 kwatts ATW 690 Newton/Metres Torque.

Sub 12-1 A/F ratio

Video

http://www.flickr.com/photo_embed.gne?id=4...157623014415960

Graph

http://www.flickr.com/photos/90747317@N00/...57623014415960/

Dom

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • f00stx
      Quieter performance exhausts (or muffler add-on options)

      By f00stx · Posted

      So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
×
×
  • Create New...