Jump to content
SAU Community

Recommended Posts

Being built by advanced and tuned by JEM I doubt anyone will question the numbers.

Interesting about the breather being normal for that power level, not something I expected.

Being built by advanced and tuned by JEM I doubt anyone will question the numbers.

Interesting about the breather being normal for that power level, not something I expected.

Because u dont normally see it.

Out of site out of mind :)

It's the catch can breather.

For anyone possibly doubting the numbers, it ran 10.7@147mph at WSID with 490rwk. Next time out with 536rwk should do 150mph+

The car is also on the Motive 16 Drag battle DVD.

I'm questioning the numbers! That was 10.2@147 not 10.7! :)

Being built by advanced and tuned by JEM I doubt anyone will question the numbers.

Interesting about the breather being normal for that power level, not something I expected.

This was the first thing I noticed as well

Seems odd to keep pulling those numbers with that happening

It was mainly in relation to that...

I'm questioning the numbers! That was 10.2@147 not 10.7! :)

Yeah I wasn't sure if it was 10.7 or 10.2 :D

Edited by SRS13
  • 2 weeks later...

I might be selling my 5858 BB turbo. Brand new, box hasn't even been opened!! After $1450 for it.

Thinking about going bigger (6262) as the engine being built will need a bigger turbo!

If interested PM me.

Edited by SRS13
  • 2 weeks later...

Finally got some numbers but its not done yet,

On the New motor, with the 6262 .84 TS BB CEA.

Run-in tune (super safe) verylow/negative timing, 9-10 psi. 210-220 rwkw.

Turbo is super responsive and perky even with the timing so low, I noticed instantly its very throttle responsive, its very possible my intake setup helps in this regard. But the way it moves the air so quickly I have a good feeling this setup will be pretty decent on the 30/25 with vct!

One noticable characteristic.. the turbo seems very loud. even on low boost. however i am moving from lowmount to high mount during this build, so that might be why i think that.

will be doing real tuning next week if all continues well. Will post numbers as promised when its done. Unfortunently still running hte PFC and Tomei Z32 as no one has purchased the gear yet.

-dale

Edited by SilverECR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
×
×
  • Create New...