ido09s Posted December 11, 2016 Share Posted December 11, 2016 fark me, 49psi!!!!! what fuel? I am hoping to make 550rwkw at 30 odd psi with a 6766. I currently make 485rwkw at 23psi and the car runs 138mph all day long which is the true dyno Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7797565 Share on other sites More sharing options...
JH32 Posted December 11, 2016 Share Posted December 11, 2016 5 hours ago, ido09s said: fark me, 49psi!!!!! what fuel? I am hoping to make 550rwkw at 30 odd psi with a 6766. I currently make 485rwkw at 23psi and the car runs 138mph all day long which is the true dyno Is that on a 2.6? 1 Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7797618 Share on other sites More sharing options...
Ersatzreifen Posted December 11, 2016 Share Posted December 11, 2016 9 hours ago, ido09s said: fark me, 49psi!!!!! what fuel? I am hoping to make 550rwkw at 30 odd psi with a 6766. I currently make 485rwkw at 23psi and the car runs 138mph all day long which is the true dyno Which ar?T4 ? Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7797624 Share on other sites More sharing options...
ido09s Posted December 11, 2016 Share Posted December 11, 2016 Certainly is a 2.6. Stock crank that we used to Rev to 9500rpm. We've pulled it back to 8800 now Pretty sure its a 1.0 that I got and it's a T4 flange 1 Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7797626 Share on other sites More sharing options...
azzada1 Posted December 15, 2016 Share Posted December 15, 2016 (edited) Had my car on the dyno yesterday.. 570hp on 20psi, Built 25 with the gen 2 6266 t3 .82 Currently the car is blowing alittle smoke on idle (typical precision?) so i wanna get that sorted aswell as a cas syncing issue before turning it up alittle more... Other then that im stoked with how it drives and comes on Edited December 15, 2016 by azzada1 Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7798644 Share on other sites More sharing options...
ido09s Posted December 15, 2016 Share Posted December 15, 2016 Is it a new PT or a used one? I wouldn't say smoke is typical of a PT. Mines brand new and no smoke Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7798647 Share on other sites More sharing options...
azzada1 Posted December 15, 2016 Share Posted December 15, 2016 Was more a query then a statement... brand new turbo with earls inline oil filter... motor was abit of an unknown so it could be ring gap/rings lol... Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7798649 Share on other sites More sharing options...
33GTRV Posted December 16, 2016 Share Posted December 16, 2016 Fuel was sucrogen e85 Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7798795 Share on other sites More sharing options...
acr Posted January 16, 2017 Share Posted January 16, 2017 Hi all, Do you think it will be possible to make around 700kw from a 6870 - h cover 1.15 rear on at rb28. Head has been ported and built? Trying to keep under 40psi. Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7805099 Share on other sites More sharing options...
Lithium Posted January 16, 2017 Share Posted January 16, 2017 (edited) 12 hours ago, acr said: Do you think it will be possible to make around 700kw from a 6870 - h cover 1.15 rear on at rb28. Head has been ported and built? Trying to keep under 40psi. No one else has weighed in so I'll bite Those turbos have been proven to make that power and more @ wheels on the "right dyno". I personally wouldn't expect that kind of number on a Mainline or a Dyno Dynamics, but a Dynojet or Dynapack I'd say is plausible IF the engine spec and all supporting mods are up to it. E85 would be a must, btw. Edited January 16, 2017 by Lithium Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7805201 Share on other sites More sharing options...
SimonR32 Posted January 17, 2017 Share Posted January 17, 2017 From my vague memory I've seen one do 700kw on a Dyno Dynamics fairly easily, may have been just under but not much (I was replacing my gearbox at the time so was a little distracted). That was a 2.8L and from memory around a 1.0 rear Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7805316 Share on other sites More sharing options...
acr Posted January 17, 2017 Share Posted January 17, 2017 Do you guys remember roughly what psi? Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7805325 Share on other sites More sharing options...
Lithium Posted January 17, 2017 Share Posted January 17, 2017 12 hours ago, SimonR32 said: From my vague memory I've seen one do 700kw on a Dyno Dynamics fairly easily, may have been just under but not much (I was replacing my gearbox at the time so was a little distracted). That was a 2.8L and from memory around a 1.0 rear Sweet, that's good to know - I'm always cautious setting expectations on those dynos, people have gone >1000whp on other more popular breeds of dyno but its hard to know how to convert. Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7805400 Share on other sites More sharing options...
SimonR32 Posted January 18, 2017 Share Posted January 18, 2017 (edited) 19 hours ago, acr said: Do you guys remember roughly what psi? 2.3bar Edited January 18, 2017 by SimonR32 Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7805511 Share on other sites More sharing options...
ohno1 Posted January 19, 2017 Share Posted January 19, 2017 Simon - was this RH9R? Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7805897 Share on other sites More sharing options...
azzada1 Posted January 19, 2017 Share Posted January 19, 2017 (edited) More likely to be "sheety" tuned by scali... Not sure if RH"9"R has had anymore dyno time since making its 726 @ 1.7bar... Edited January 19, 2017 by azzada1 Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7805899 Share on other sites More sharing options...
QUP29 Posted January 24, 2017 Share Posted January 24, 2017 (edited) I reckon you will make it, but you'll need around 40psi these turbos love boost. I'm using 6870 1.0 rear just made 488hp on 15psi 98 pump fuel. Nothing to serious as it's just a run in tune my motor is only 2.7 and not built for 98 pump. Also it was on a mainline dyno 4wd Edited January 24, 2017 by QUP29 Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7806823 Share on other sites More sharing options...
azzada1 Posted February 20, 2017 Share Posted February 20, 2017 On 15/12/2016 at 2:41 PM, azzada1 said: Had my car on the dyno yesterday.. 570hp on 20psi, Built 25 with the gen 2 6266 t3 .82 Currently the car is blowing alittle smoke on idle (typical precision?) so i wanna get that sorted aswell as a cas syncing issue before turning it up alittle more... Other then that im stoked with how it drives and comes on Ok after getting frustrated with the smoke on idle and struggling to believe it was the brand new turbo with an inline oil filter I pulled the motor down and came across afew problems from when it was first assembled.. oil rings weren't to flash, acl pistons had hit and snapped off 5 of 6 oil squirters and we also found some glass beads in the head... frustrating but at least we found the real issues and tbh the motor was cheaper then the turbo.. My Reason for this post was to clarify that the smoke was not in fact the turbo, However if I hadn't had the inline filter I fear the turbo may have been damaged and needed a rebuild, the filter caught about 5 small pieces of glass and sand.. For the $80 it costs for the earls filter it seems almost stupid not to run it as insurance. The motor has been rebuilt now and I've ordered a ross trigger kit to eliminate the CAS issues, I look forward to turning it up to see what the 6266 can do on 25-30psi on the rb25. Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7812347 Share on other sites More sharing options...
gorto88 Posted April 23, 2017 Share Posted April 23, 2017 If anyone is chasing a new 7685 (waiting list at most places), I've got a brand new (test-fitted only) 7685 gen 2, dual ball-bearing, 1.12 ceramic coated exhaust housing. Should crack 1000whp with correct supporting mods. Chasing $4800 (RRP is around $5500) or swap for a 6870 gen 2 (prefer 1.15 twinscroll rear) with cash my way. PM me if interested. Cheers. Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7825367 Share on other sites More sharing options...
Buraz Posted April 23, 2017 Share Posted April 23, 2017 What's everyone's results with 6262 precision?? My is out of puff at just under 440kw and 26 psi on a 2.8l stroker Link to comment https://www.sau.com.au/forums/topic/313603-precision-billet-turbos/page/131/#findComment-7825384 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now